Listening to many people say that when decorating a home, if living rooms, bedrooms and even balconies are all covered with solid wood flooring, the effect of expanding the visual field can be achieved, and the luxury and richness of the living room can be highlighted. Therefore, Ms. Wang took this proposal without hesitation in the renovation. At that time, the decoration staff had solemnly reminded him of the drawbacks of doing so. Ms. Wang turned a deaf ear.
After the construction was completed, Ms. Wang could not wait to open all the lamps in the room. Looking from the living room to the bedroom, the dark red solid wood floor was completely covered in the living room and went to the balcony. It was indeed magnificent, and the effect was really good. Inevitably a bit smug. If the solid wood floor needs renovation in 5 years, it would be understandable if it is of a larger size, and it is not sensible for a room like Ms. Wang’s home to be more than 60 square meters. This does not, after a period of use, the trouble comes one after another: Guests have to mobilize people to change shoes, otherwise the "delicate" floor will be damaged, if the hall is covered with floor tiles, it is much more casual; kitchen, bathroom Between the entrance and the living room, there is no buffer transition zone, and joints are inevitably eroded by water. For a long time, the joints are wet. The paint on the floor has seen signs of flaking and signs of rottenness. In the long run, it cannot be rotted. “Oh, I knew this way, it would be nice to have a non-slip floor tile here.†Faced with this scenario, Ms. Wang sighed, “If the decoration can have a second choice, I will never choose this full-flooring wooden floor. The plan was."
As far as Ms. Wang’s case is concerned, the bedroom is paved with solid wood flooring, and the rest of the ground is choosing the right tiles. This is indeed the best policy. It can be seen that in order to engage in home decoration, it is necessary to adapt measures to local conditions and to select the appropriate plan in light of their actual conditions. We must not be overwhelming and hurry to start. We must listen to the advice of our connoisseurs. Otherwise, we may regret it too late.
Flooring Flooring Flooring Flooring Decor Decorators Decorators Decorators Living room Floor tiles Bathrooms Floor tiles Bathroom doors Bedroom lamps Fixtures Bedroom lamps
High Resistance Alloy is used to produce resistance elementof conductive material.Requirements including High mechanical strength, good corrosion resistance and oxidation resistance. Working temperature is usually at500 ℃. Commonly used with constantan chromium iron, iron chromium aluminum, nickel chromium, nickel, resistivity rho (20 ℃) is 1 Ω was/m or so. It is not used in the conduction of current, but with its high resistance to limit or control the current in the circuit, such as motor, potentiometer, standard resistors, potentiometers, slip line resistor resistance element and resistance line, etc.; For the using of high resistance in the pressure sensor,Temperature compensator and temperature measuring resistor of resistance element to creatte reflect strain, temperature, magnetic field and parameters; High resistance alloy can also be used as heating elements in the manufacture of the resistance heating equipment, could be applied in current, voltage regulating and the winding of control components.
Resistance Electrothermal Alloy
Resistance Alloy,Corrosion Resistant Alloy,Resistance Electrothermal Alloy,Fecral Resistance Heating Alloys
Jiangsu nickel alloy Co.,Ltd , http://www.xhalloy.com