10mm 560W Power Tools Electric Corded Keyed Drill

I, Product Features:

• 560W (6.0 Amp) motor delivers power in demanding applications
• Keyless 10mm (3/8-in) chuck provides fast and easy bit changes
• 0 to 3000 RPM variable speed trigger provides the best results for drilling and driving
• Lock-on button provides easier control during prolonged use
• Belt clip holds drill securely while working
• Soft grip handle improves user comfort and control

II, Product Spefications: 
III, Product Applications:


IV, Products Quality Control:
4-1, Advanced Assembly Workshop - Over 20 Assembly Lines

4-2, Big Area Warehouses - Good Protection

4-3, Quality Assurance  During new project qualification status: we do a lot of test to qualify the machine, such as Motor endurance test, Vacuum Test, Temperature rise test, Hose pull test, Leak test and Drop Test, etc..
4-3-2, Production Goods Quality Control Process


We have more than 25 quality engineers to monitor and track quality status during incoming goods, in-process and finish goods. Make sure all goods are meet customer's requirement before ship the goods. All products had been certificated with CE/GS/EMC/LVD/CETL/ROHA/PAHS

Production and Samples Lead-time:
Samples Lead-time:
3-7 working days - It will be confirmed base on product requirement;
Mass Order Lead-time :
20 - 50 days - It will be determined base on actual order quantity and product requirement. It will speed a little more time for the 1^st order as need to confirm all design of packing designs such as label, color box, manual, etc.


 

High-Mast Lamps Series

The High-mast Lamp is generally refers to the new lighting device which is composed of the steel taper light pole and the high power combination lamp frame of 15 meters or above.It consists of lamp holder, internal lamp, electric rod body and basic part.Lamp head modelling can according to user requirement, surroundings, lighting need specific and definite;The interior lamps are mainly composed of floodlights and projection lamps. The light source adopts NG400 high pressure sodium lamp, and the lighting radius is 60 meters.The bar body is usually a pyramid structure, which is made of steel plate, with a height of 15 to 40 meters, which consists of two to three sections.

Material characteristics

1. Beautiful appearance, large lighting area, good lighting effect, concentrated light, uniform illumination, small glare and easy to control and repair.

2. Applicable places: city square, station, wharf, highway, stadium, overpass, etc.

3. The lamp pole is a high quality steel plate by moulding into a multi - pyramid splicing steel rod, through hot galvanizing anti-corrosion treatment.

4. The lamp frame is made of high quality stainless steel.

5. Fasteners bolts and nuts are stainless steel.

6. Light source:400W-1000W sodium lamp.

Specifications:

Height: from 18m to 50 m

Suit for: highway, expressway, parkway, freeway, central motorway junction, truck and bus terminals, railyards, ship docks, airports, ferry terminals, prisons, industrial and commercial sites, international borders.

Shape: round, multi-pyramidal, column form, polygonal or conical

Material:

Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2

Tolerance of Dimension: ±2%

Lighting Source: 400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m²

Light plate: Various figure of selection ,material with hot dip galvanization steel frame

Lifting System: Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute
Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut

Electric Appliance Control Device: Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode

Surface treatment: Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.

Joint of Poles: Insert mode, inner flange mode, face to face joint mode .

Design of pole: Against earthquake of 8 grade

Wind Speed: 80 Km/Hour

Welding: We has past flaw testing. Internal and external double welding makes the welding in shape

Thickness: 6 mm to 20 mm

Production Process:
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging

Packages: Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required

High-Mast Lamps Series,High Mast Lamps,High Mast Light,High Mast Light Pole

Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulighting.com