Luminous pigments is by absorbing various visible light emission function, and can be reused many times. The product does not contain radioactive elements, can be used as an additive. The appearance of color pigment exhibits itself in the light, then dark emit different colors of light, showing excellent low-level emergency lighting, marking and instructions decorative landscaping features.
Â
Luminous pigments ingredients
| Ingredients | The proportion |
| Strontium aluminate | >=93% |
| Manganese oxide | <=3% |
| Europium oxide | <=2% |
| Dysprosium oxide | <=2% |
| All the proporation are in accordance with the terms of oxide | |
| Conventional do not have heavy metals, rare earths dysprosium and europium is our raw material, strictly speaking this is heavy metal. Except for these two, if it does not contain heavy metals  | |
Luminous pigments applications
1. Luminous Vinyl Film
2. Luminous Emergency Evacuation Product
3. Luminous Road SignsÂ
Other Products available:
1.  Luminous self-adhesive vinyl Tape
2.  Luminous PVC rigid sheet
3.  Luminous Aluminum sheet
4.  Luminous Indication for Emergency Evacuation
5.  Luminous Indicators for Fire Facilities
6.  Luminous Pebble
7.  Luminous master batch
8.  Luminous Reflective tape
9.  Luminous RubbleÂ
Tips for luminous pigments use
1. About use and storage of containers, if you use iron or stainless steel and other metal containers containers, luminescent powder will be affected, the color is dimmed and even black. It is recommended to use a glass or plastic container.
2. About Grinding, solvent system common for emitting powder may be ground to obtain better dispersion. But with the water-based coated luminescent powder is not grinding, and polishing will destroy its aqueous envelope, thus losing the waterproof effect.
3. Need now with the current. It is recommended to use within 2Â hours When luminescent powder mixed solvent. If the mixed solution was left for too long, due to the large proportion of the light-emitting powder, it may appear to sink even the phenomenon of agglomeration, once caking, stirred again might not be so luminous powder uniformly dispersed in the solvent.
4. The light emitting powder temperature, can be used for the production of mosaic, calcined with mosaics. Luminous powder at temperature of 800 degrees is not affected, but the performance of more than 1,000 degrees luminescent powder will be subject to greater damage.
5. When the light emitting powder used outdoors, it is recommended to use waterproof luminous powder, and appropriately increase the proportion, such as 1.2: 1 (the actual percentage may refer to different solvents of different treatments). At the same time, the thicker the coating thickness. Surface coating layer and a layer of transparent varnish to better protect the coating after the coating is dried.
Transmission Fitting
Transmission hardware fittings are components used in the construction and maintenance of transmission lines for electricity or telecommunications. These fittings are designed to connect, support, and secure the different parts of the transmission line, ensuring proper functioning and reliability.
Some common types of transmission hardware fittings include:
Suspension Clamps: Used to hang the conductors from the transmission towers, providing support and preventing sagging.
Dead-end Clamps: Used to terminate the conductors at the ends of the transmission line, providing support and preventing them from slipping.
Splice Sleeves: Used to join two conductors together, ensuring a secure and conductive connection.
Insulators: Used to electrically isolate the conductors from the transmission towers, preventing electrical leakage and ensuring proper insulation.
Guy Wire Fittings: Used to secure and stabilize the transmission towers, preventing them from swaying or collapsing.
Connectors: Used to connect different components of the transmission line, such as conductors, insulators, and fittings, ensuring a secure and reliable connection.
Yokelink supply a full line of Tower hardwares, , provide part number to get a quote on these products, leave your message, or send us an email to get answers for your questions or product you needed.
Socket Eyes are used for connecting conductor clamping devices to ball and socket type insulators. Made by malleable iron, hot dip galvanized to meet ASTM A153 specification.
Ball Eyes are used to attach ball and socket insulators to other associated hardware. Hot dip galvanized to meet ASTM A153 specification.
Thimble Cleivs are used for attaching guy to pole eye plate. Hot dip galvanized to meet ASTM A153 specification.
Turnbuckles are used as adjustable extension links to maintain proper tower clearance on assemblies at tower end.
Strain Clamp used for distribution and transmission line construction with all aluminum ACSR, or aluminum alloy conductor.
Transmission Hardware Fitting, Socket, Ball eye, Hot line, Chain Link, Turnbuckle, Suspension, Strain, Yoke plate
Ningbo Yokelink Machinery Co.,Limited , https://www.yokelink.com