1. High efficiency and energy saving: its heat transfer coefficient is 3000~4500kcal/m2·°C·h, which is 3~5 times higher than the thermal efficiency of shell-and-tube heat exchanger.
2. Compact structure: the plate heat exchanger plates are closely arranged. Compared with other heat exchanger types, the plate heat exchanger has less floor space and space occupation, and the plate heat exchanger with the same heat exchange capacity is only the tube. 1/5 of the shell heat exchanger.
3. Easy to clean and disassemble: The plate heat exchanger clamps the clamping plate by clamping bolts, so it is easy to disassemble and install, and can be opened and cleaned at any time. At the same time, due to the smooth surface, the turbulence is high and it is not easy to scale.
4, long service life: plate heat exchanger is made of stainless steel or titanium alloy plate, can resist a variety of corrosive media, rubber pads can be replaced at will, and can be easily installed, disassembled and repaired.
5. Adaptability: The plate heat exchanger plate is a separate component, which can be increased or decreased according to requirements, and has various forms; it can be applied to various requirements of different processes.
6. Without liquid, the plate heat exchanger sealing groove is provided with a liquid discharge channel, and various media will not collide. Even if leakage occurs, the medium is always discharged outward.
Our Pipe Elbow is made from a variety of materials, such as alloy steel, stainless steel, etc, and the materials used depend on the function of the piping unit. It is a bent at an angle to allow straight pipes to be joint at an angle, there by realizing a change of direction. Of all pipe fittings, pipe elbow is the most widely used one, which is used in a variety of applications in industries such as electrical power, marine, heating, papermaking, metalurgy, petrochemical, chemical, oil and gas, and more.
Range : 1/2"NB TO 48"NB IN SCH: 20, 30, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : SEAMLESS / WELDED/ FABRICATEDForm :
» Elbows in Long & Short Radius in 45 deg, 90 deg, 180 deg.
» Equal, Unequal Tee & Barred Tee .
» Eccentric Reducer & Concentric Reducer
» Caps & Crosses.
» Long & Short Stub End.
» Swage Nipple & Barrel Nipple.
Standard : ASTM / ASME A/SA 234
Grade : WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 23, WP 91
Value Added Services:
» Hot Dipped Galvanizing
» Sand Blasting
Alloy Steel Pipe Fitting,Alloy Steel Fitting,Sr Elbow,Alloy Steel Seamless Elbow Fittings
Shijiazhuang Bang dong Pipeline Technology Co,Ltd. , http://www.bd-pipefitting.com