The main cause of garden light failure

1. Poor construction quality

The proportion of failures caused by construction quality is large. Main performances: First, the depth of the cable trench is not enough, the sand-covered bricks are not constructed according to the standard; the second is that the production and installation of the aisle tubes do not meet the requirements, the two ends are not made according to the standard; the third is when paving the cable The fourth pre-buried pipe is not constructed according to the standard requirements, mainly because the pre-buried pipe is too thin, plus a certain degree of camber, it is quite difficult to wear the cable, and there is a "dead bend" at the bottom of the foundation; The wire nose crimping and insulation wrap are not thick enough, and after a long period of operation, the phases are short-circuited.

2, the material is not off

Judging from the fault conditions handled in recent years, there are also many factors in the low quality of materials. The main performance is: the wire contains less aluminum, the wire is harder, and the insulation layer is thin. This situation has been more common in recent years.

3, the quality of supporting projects is not too hard

The courtyard light cable is usually laid on the sidewalk. The construction quality of the sidewalk is poor, the ground sinks, and the cable is deformed by force, resulting in cable armoring. In particular, the northeastern region is in a cold zone, and the arrival of winter makes the cable and the soil form a whole. Once the ground subsides, it will be strained at the bottom of the garden lamp base, and when the rainwater is too much in summer, it will be blown at the base root.

4, the design is not reasonable

On the one hand, it is overloaded. With the continuous development of urban construction, the garden lights are also constantly extended. When the garden lights are newly built, which circuit lights are close to each other, which circuit is received, and in recent years, the advertising industry has developed rapidly, and the advertising load is also connected to the courtyard. On the lamp, the load of the garden lamp is too large, the cable is overheated, the wire nose is overheated, the insulation is lowered, and the grounding is short-circuited; on the other hand, the lamp post is designed only considering the condition of the lamp post, ignoring the space of the cable head, After the cable head is wrapped, most of the doors are not closed, sometimes the cable length is not enough, and the joint production does not meet the requirements, which is also a factor causing the failure.

This industrial grade anti-fatigue mat is thicker, heavier, and stronger - engineered to meet the toughest application requirements and is particularly suited for multi-shift operations in dry work areas. At a full ONE-INCH it is the ultimate anti-fatigue product maximizing worker productivity and comfort. and is easy to clean. thickness is ideal for multi-shift environments.Where to UseFor use in tough industrial environments where fatigue prevention and a non-slip surface is critical. Ideal for multi-shift environments or any work cell where the worker may be standing for prolonged periods of time
            Generally, rubber mats serve a protective purpose. A common feature among them is that they protect the existing floors of the area on which they are placed. Having dependable mats in place can prevent costly damage to your existing wood, tile, laminate, or even concrete floors. Some of our floor mats come in standard mat sizes,to protect a specific area from harm. It should be noted, however, that just because many segments of rubber mats come pre-cut, not all of them do; it can be quite simple to have custom rubber mats fitted to your home or office in the event you have specific or unique size requirements. We also offer rolls of rubber matting for a wider area of floor protection. Floor protection is crucial for any area, whether it is a home or industrial workshop.




Anti Slip Rubber Floor Mat

Rubber Flooring Mat


Company information:

RenqiuXingcheng Rubber Products Co., Ltd. is located in the side of the Baiyang lake, our company is professional manufacturer of rubber products. We are one of the leading rubber company in china,The company is a private enterprise which is engaged in scientific research, production, sales and service and has obtained ISO 9001 certification. Our main business is producing all kinds of rubber products, including anti-skid plates, Rubber Sheet Series, Rubber Mat Series and horse mat series ect., The products are shockproof, anti-wear, anti-high and low temperature, anti-aging, oil resistant and chemical resistant in character.At present, our products have been sold at home and abroad and mainly exported to Canada, Germany, Chile, etc. We welcome domestic and foreign merchants to negotiate and cooperate with us. We are willing to join hands with old and new friends in creating a better tomorrow. 







Rubber Mat

Rubber Mat,Livestock Rubber Mats,Animal Rubber Mat,Anti-Fatigue Rubber Mat

Renqiu Xingcheng Rubber Products Co., Ltd. , http://www.xingchengrubber.com