My family belongs to the working class. In order to save money, we have to design new homes ourselves. The problem I have been considering during the renovation is how to save money and achieve good results. Therefore, from the beginning of the design, we must follow this principle and try to make arrangements in some details. After the renovation was completed, the effect was very good. My friends said that my home was definitely worth the money. In home improvement, my experience is to distinguish between projects that can be “provincial” and “if not provincial”.

Wall outside the provincial province. I believe that concealed items, such as wires and water pipes buried in the walls, must be of good quality, and they must not be greedy and cheap, because it is costly to repair if something goes wrong. Other decorations, curtains, lamps, etc. that are hung on the wall can be relatively inexpensive. First, it is convenient to repair and replace. Second, it can be changed at any time for a long time, and it will not be too distressing.

Switch does not save the province. Most people buy switches and sockets often choose the same brand, my choice is to switch to buy a good brand, while the outlet is to choose the ordinary brand. The reason is that the frequency of use of the switch is high, and the requirement for quality is relatively high. And the switch is generally installed in a conspicuous position, requiring an equally good decorative effect. The general use frequency of the socket is very low, televisions, refrigerators and other electrical appliances will not be plugged and unplugged for a long period of time after plugging in the power supply. In addition, the outlet is usually installed in a concealed position, and there is no high requirement for decorativeness. Since the number of switches in a house is generally only a few, and the number of outlets is often several tens, this can greatly reduce the cost.

The ground is not provincial. At home, people spend the longest time with the ground, but generally do not directly contact with the wall, so I choose the ground material to pay special attention to quality, whether it is the wooden floor in the bedroom, the living room, or the kitchen, bathroom tiles are selected well-known brands product. The walls of the paint and kitchen and bathroom wall tiles are generally selected brands, because the ground has only one surface, and the facade has four faces, so that the savings can be calculated to be a lot.

Top Ten Brands Wardrobe Brand Switch & Socket Decoration & Decoration TV Decoration Renovation Living Room Floor Tiles Kitchen Wall Tiles Bathroom Design Bathroom Wall Tiles Bathroom Tiles Bedroom Lighting Home Decorations Kitchen Tiles Floor Tiles Decoration Home Bedroom Lamps

Compression/Tension Sensor

Tension & Compression Load Cells

Tension and compression load cells can be used to measure both tensile and compressive loads. Manufactured from stainless steel or aluminium alloy, these tension and compression load cells offer a high level of corrosive resistance for use in harsh environments with environmental sealing up to IP68. Available in capacities from 1kg to over 100 tonnes, all tension and compression load cells are supplied with a full certificate of calibration. Custom designed tension and compression load cells are also available, along with a wide variety of associated instrumentation.

Benefits:

• High accuracy
• Hassle free installation
• Long term, reliable operation
• Customisable

Compression Sensor,Tension Sensor,Compression And Tension Sensor,Compression/Tension Sensor

Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcells.com