The solid wood floor has a natural atmosphere, which can give people a warm and intimate feeling. The tough vision is in stark contrast with the soft features, making it an important place in modern home decoration. Moreover, the wood itself "breathing", can absorb moisture and evaporate, thus maintaining the environmental humidity within the range of the human body feeling comfortable, and in line with the modern people's pursuit of environmentally friendly and healthy lifestyle, the top ten brands of the floor, Shiyou floor, combine the above characteristics. In the home life will bring you a different feeling.
The floor of the living room is decorated with wooden floors, which of course is very pleasant. However, in the process of using wooden flooring, problems such as insects, quilting, squeaking, dirty boards, painted faces, drums and lifting are often encountered, which makes us distressed. How to avoid these problems? The key is to choose materials!
At present, the brands of solid wood flooring on the market are varied and the quality is also uneven. I don't know how to start. The top ten brands of the floor, Shiyou Floor, suggest that when you choose, you can choose the high-quality solid wood composite flooring as long as you master the following eight standards!
First, look at the amount of formaldehyde released.
The amount of formaldehyde released is one of the indicators for purchasing wood flooring, and it is also the most critical point! This mainly depends on whether its formaldehyde limit has reached the national standard. Generally, the formaldehyde limit is divided into three grades: EO<=0.5mg/l, E1<=1.5mg/l, E2<=5mg/l; According to the newly issued index of China's Health and Environmental Protection Bureau, the formaldehyde content of all solid wood flooring reaches E2. Level, even if qualified. To reach EO, the standard material of E1 grade can be directly used for interior decoration, and it is considered as environmentally safe floor! Shiyou floor is the top ten brand of floor, and it is the only floor brand in China with formaldehyde emission reaching EO standard. The emission of formaldehyde from aldehyde E0 environmentally friendly laminate floor is only 1/3 of the current national standard.
Second, look at the origin of the raw materials.
The performance of solid wood flooring is determined by the wood of its trees. Floors made from solid wood are naturally much more stable. When choosing, we should try to choose better tree species. Generally better woods are rosewood, teak, eucalyptus and so on. In general, the imported raw materials are better than the domestic ones! Shiyou Floor combines seven high-quality timber procurement bases in Brazil, Paraguay, Indonesia, Africa, Myanmar, Russia and North America to ensure the supply of high-quality raw materials. In order to achieve the best configuration of the floor, Shiyou also screens the high-quality raw materials, rejects all the B-grade and C-grade raw materials of the wood, and selects the A-grade plates 100%.
Third, test the moisture content.
The moisture content of solid wood flooring should be chosen to be the same as that of the residential installation area, so that the possibility of problems in future use will be greatly reduced. The national standard stipulates that the moisture content of wooden floors is 8% to 13%. In fact, China has a vast territory and different water content requirements in different regions. At the time of purchase, the moisture content of the selected wooden floor in the exhibition hall is measured first, and then the moisture content of the same type of wood flooring of the same specification and the same specification is measured. If the difference is +2%, it can be considered qualified. According to the climate difference between the paving areas in the north and south, Shiyou Floor implements the test of artificial moisture content to ensure that the moisture content of each floor differs from the local environment by no more than 0.5%.
Fourth, the size and size.
Determine the appropriate length and width. The solid wood floor is not as long as it is wider and wider. The wooden floor with excessive length and width is relatively easy to deform. Try to choose the standard version, length 450---910mm, width 90---125mm. Below this standard are non-standard boards. Many people think that the smaller the floor, the better the stability. It is correct to make sense. However, since many non-standard boards are made of non-trunks, the stability will be much lower.
Fifth, check the quality of the board.
Board quality is one of the main criteria for floor grading. First check whether the same tree species, whether it is mixed, whether the floor has defects such as dead knots, joints, cracking, decay, and bacteria. Then observe the accuracy of the wooden floor. Generally, after the wooden floor is unpacked, 10 pieces can be taken out and assembled by hand. Observe the bite of the joint, assemble the gap, and the height difference between the adjacent plates. If the seam is strictly combined, there is no obvious height difference. If there are chromatic aberrations, joints, textures, etc. consumers can ignore, because these natural properties of wood, showing the natural color of solid wood flooring.
Sixth, look at the quality of auxiliary materials.
The quality of the auxiliary materials directly affects the installation and service life of the floor. Therefore, the price and quality of the skirting board and the beading are also a problem that consumers need to care about. In the past, the baseboard for strengthening the floor was mostly ordinary wooden baseboard, which was not only easy to deform, but also easy to bring formaldehyde pollution. At present, the latest technology on the market is a new type of baseboard produced by American polymer foam technology. The release of formaldehyde in this material is almost zero, and it also has wear resistance, flame retardant, mildew proof, antistatic, etc. The advantages, and the strong toughness and formability, are ideal for the perfect decoration of special floor and curved walls.
Seven, look at the paint quality and paint process.
After the surface of the board is processed by paint, it is called lacquer board. The quality of the board surface and the paint surface are selected. When purchasing, the key is to look at the paint film finish, no bubbles, paint leakage and abrasion resistance. Evenly flat, no bubbles, no cracks, no leakage paint. As the top ten brands of flooring, Shiyou floor six-side sealing paint can fully prevent moisture, completely cut off the floor moisture passage, control the change of floor moisture content, and achieve anti-deformation and anti-cracking effect.
Eight, the priority of quality after-sales service.
There is a famous saying in the flooring industry: “three-point floor, seven-point pavementâ€, which shows the impact of floor installation on the quality of the floor. Therefore, consumers must pay attention to selecting manufacturers with high-quality after-sales service to install the floor. It is the top ten brand flooring like Shiyou. Before the installation, you must sign the installation agreement. In the agreement, if there is a problem with the solid wood floor, who is responsible for it, this will prevent the manufacturer from shirking responsibility, and the local board will not be repaired if there is a problem.
Big brands generally have better after-sales service. Shiyou floor is the top ten brands of flooring, equipped with professional floor maintenance service personnel, good floor and strict standard construction and maintenance instructions, so that your floor is more durable and durable!
Sanding Sponge,Sandpaper Sponge ,Fine Sanding Sponge ,Sponge Sanding Pads
Grinding Wheel ,Grinding Wheel Co., Ltd. , http://www.nbsandpaper.com