Efficient coating machine exhaust fan maintenance and maintenance: The flat bag filter should be regularly checked for wear and tear. If it is found to be damaged, it is necessary to repair or replace the bag in time; according to the actual situation, the bag should be cleaned regularly. If the wind flow is not reached after the vibrating motor is cleaned, the air flow should be considered. Clean the cloth bag. When cleaning or replacing, simply loosen the four sturdy nuts of the filter unit and pull out; when reinstalling, pay attention to the seal between the filter parts and the fan parts (with sealing packing between the two parts); After six months, remove the vibrating dusting motor cover, add grease to the eccentric bushing bearing, and check whether the rubber sealing film is damaged. If it is damaged, it should be replaced; if the fan is driving, stopping or running, if it is found In the normal case, the shutdown should be checked immediately. For the minor faults found in the inspection, the cause should be identified in time, and the problem should be eliminated or dealt with. If the fault cannot be eliminated or the fault is found, it should be repaired immediately; the lubricant should be replaced after each inspection; when the fan is started after the inspection, it needs to be Pay attention to whether the components of the fan are normal, and only when they are normal, they can be used formally. High-efficiency coating machine peristaltic pump stepless speed changer maintenance: 1 The stepless speed changer and reducer should be added to the specified lubricating oil respectively; 2 The temperature of the working environment of the stepless speed changer shall not exceed 40 °C, and the surface of the working oil temperature shall not exceed 80 °C; 3 The stepless speed changer must be adjustable under the condition of starting up, otherwise the machine will be damaged; 4 When the stepless speed changer is delivered from the factory, the speed limit screw has been adjusted to the limit position and must not be adjusted arbitrarily to avoid damage to the machine; 5 stepless speed changer, it is not suitable to stay at a fixed speed for a long time; 6 If the motor is replaced, the original motor flange with oil seal should be kept to prevent the lubricant from flowing into the motor; 7 Lubricants used in continuously variable transmissions must be replaced regularly. Author: Chang Hong medicine machine This article links: Copyright @Reprinted must indicate the author and original source in the form of a link |
Disperse Dyes have complete range of spectrum, simple application,
economic cost , good performance, applicable to polyester, nylon and
acetate fiber.
Dynaspers-ACE & UN-SE is disperse Dyes for microfiber and rapid dyeing
Trichromatic combination has same dyeing curves and good compatibility
Good levelling property and dyeing reproducibility. Especially suitable for blend of different types of synthetic fibers .
Dynaspers-XF is disperse dyes of high washing fastness.Good thermal
migration property.Good washing fastness, especially for deep shades
Suitable for rapid dyeing.Applicable in direct printing, or dyeng
microfiber, PE/elastic fiber blend, T/C, low staining on nylon and
cotton . Sensitive to pH value, need careful control on pH range.
Dynasperse-WF is disperse dyes of high washing fastness have good
various fastness, manageable and reproducible, through Oeko-Tex Standard 100 . an economical range for high fastness requirement. Used with Super
Disperseing agent EL-SF will have better result and saving cost.
Dynasperse-ACT range-disperse dyes for acetate fiber, especially good for diacetate fiber.
Dynasperse-ACT-EF Eco friendly serials have good performance in liquor
ratio variation and at dyeing temperature fluctuation, less affacted by
metamerism, excellent color fastness and excellent in color
reproducibility by strict quality control.
Dynasperse-SP are disperse dyes for heat transfer printing Ink.
Disperse Dyes
Disperse Dyes, Disperse Dyes For Polyester, Fluorescent Disperse Dyes, Disperse Dye Black
Dynasty Chemicals (NingBo) Co., Ltd. , http://www.dychemco.com