2014 auto parts industry operation data analysis

Abstract Remanufacturing of auto parts is an important content and concrete practice for promoting the development of circular economy in China. It is also a positive and effective measure generally adopted by the auto market in economically developed countries. Remanufacturing has become an important industry. In 2014, the auto parts industry operating data analysis is as follows: ...
Remanufacturing of auto parts is an important content and concrete practice for promoting the development of circular economy in China. It is also a positive and effective measure generally adopted by the auto market in developed countries. Remanufacturing has become an important industry. The operational data of auto parts industry in 2014 is analyzed as follows.

15 auto parts listed companies in the first three quarters fell

In the first three quarters of 2014, 15 of the 61 auto parts companies saw a year-on-year decline in the performance of listed companies, of which 6 companies fell more than 40%, namely Kama B, Hualing Xingma, Hongte Precision, Hunan Tianyan, AVIC Panther and Feile shares.

In view of the decline in performance, most listed companies have not been detailed in the third quarterly report, only a few companies have detailed instructions. According to the market research report of the auto parts industry released by the China Report Hall, Yunyi Electric, whose main product is a vehicle rectifier and a vehicle regulator, said that it was affected by the slowdown in the growth of domestic self-owned brand passenger car sales, and The company's fundraising project has not yet fully reached production, and the overall operating cost of the company has increased slightly compared with the same period of last year, resulting in a slight decrease in net profit.

During the reporting period, Yunyi Electric realized operating income of 96.05 million yuan, down 2.37% from the same period of last year; net profit attributable to ordinary shareholders of listed companies was 14.66 million yuan, down 22.53% from the same period of last year; the company's first three in 2014 The total operating income for the quarter was 312.08 million yuan, an increase of 0.74% over the same period of the previous year; the net profit attributable to ordinary shareholders of listed companies was 60.81 million yuan, down 11.17% from the same period of the previous year.

It must be said that the four words of the lips and the cold are particularly suitable for use here. In the first three quarters, the performance of domestic independent brand car companies was indeed not very optimistic, including the performance of BYD, Great Wall Motor, Jianghuai Automobile and other car companies in the first three quarters. BYD's net profit for the first three quarters fell 16.38% year-on-year.

Great Wall Motor's net profit for the first three quarters fell 9.49% year-on-year. In the first three quarters, except for SUV sales, which increased by 16% year-on-year, sales of pickup trucks and cars all declined. Among them, compared with the first three quarters of last year, car sales fell year-on-year. 56%, has passed the level of lumbosacral.

The performance of parts companies in the first three quarters was better than the whole vehicle

In the first three quarters of 2014, the domestic auto market continued to maintain rapid growth. Not only did the performance of automakers rise, but the performance of component companies also rose, and the overall performance was better than the whole vehicle.
Revenue and net profit data of 20 auto parts companies in the first three quarters

According to the latest data, in the stable growth of the industry, the performance of domestic mainstream parts and components companies has risen sharply. In the first half of this year, China's 20 mainstream parts and components enterprises achieved a total revenue of 216.103 billion yuan, a year-on-year increase of 12.3%; net profit increased from 11.292 billion yuan to 15.451 billion yuan, a sharp increase of 36.8%, both of which were higher than the whole vehicle enterprises. Its average net profit margin increased significantly, up 1.3 percentage points year-on-year to 7.1%.

1. Product introduction

   Coal-based Column Desulfurization Column Activated Carbon used high quality anthracite as raw material. Adding a certain proportion of adhesive, auxiliary catalyst, by selection, proportioning, grinding, molding, drying, carbonization, activation and deep processing made. 


2. Application

   This product is mainly used in all kinds of gas, such as water gas, semi water gas, coke oven gas, natural gas, carbon dioxide gas, city gas, synthetic ammonia process gas, and exhaust gas in sulfur dioxide chemical raw materials and other containing mercury. It also used for adsorption of flue gas of power plant equipment, including the removal of sulfur dioxide and saltpeter, which replace the lime desulfurization process before. It also applies to other gas that contains mercury cannot get rid of the low concentration, which is equal to or below the national emission standard.  

3.Transportation and Packing

 Woven bag, lined with plastic film bags, each 25kg can also be packaged according to customer demand. The product should be placed in a cool and dry place during storage; When transportation, it prevents to mixed with hard materials, to prevent carbon particles broken that affecting the quality of packaging, to prevent breakage. To avoid leakage or mixed with debris; to avoid water, oil and fire.

Column Desulfurization Column Activated Carbon

Column Desulfurization Column Activated Carbon,Desulfurization Coal Column Activated Carbon,Desulfurization Coal Column Activated Carbon

Ningxia XingKai Silicon Industry Co., Ltd. , https://www.xingkaisic.com