On the 2nd, the spot market price of construction steel fluctuated slightly. The prices of Hangzhou, Nanjing, Jinan, Fuzhou, Changsha, Wuhan, Tianjin, Taiyuan, Chongqing, Chengdu, Guiyang and Lanzhou fell by RMB 10-40 per ton. Xi'an market price rose by 20 yuan / ton. The average price of HRB400 (20MM) in the national market is 2,934 yuan / ton, down 8 yuan / ton from the previous trading day.
From the market feedback situation, the market opened yesterday, the snail 1505 opened at 2548 yuan lower than the previous settlement price, 0.91%, the period screw opened higher and lower, the market was slightly loose. Yesterday, the local leading sand, Yong, and Sinosteel factory policies were in line with the market, and all of them were mainly down. There were also different levels of subsidies for the previous period. According to the price of the steel mill, the agents were slightly profitable. Therefore, in response to the current situation of the gradual decline in market demand, businesses generally seem to have insufficient confidence and prices have fallen slightly.
In today's industry information, in the first three quarters, China produced a total of 618 million tons of crude steel and 839 million tons of steel, up 2.34% and 5.02% respectively over the same period of the previous year. It is estimated that China's crude steel output will be 826 million tons this year. Different from the single-digit growth of crude steel production, China's steel export growth has been extremely rapid this year. In September and October, China's steel exports exceeded 8.5 million tons, respectively, 8.51 million tons and 8.55 million tons, an increase of 73.1% and 68.6% over the same period of the previous year. Steel exports reached a new high. From January to October, steel exports totaled 7390. Ten thousand tons. Since 2000, China's steel exports accounted for 4.7% of the world's total steel exports to more than 7% in 2004 and 2005. In 2013, it rose to over 15%, and this year is expected to remain above 15%. .
Suzhou home network editor, the article comes from the Internet.
Epoxy Mortar Self Leveling Floor
Scope of adaptation:
Requires a highly clean, beautiful, clean, sterile electronic, microelectronics industry, the implementation of the GMP standard pharmaceutical industry, blood products industry, can also be used for schools, offices, homes and other floors.
Performance characteristics:
1, made of high quality epoxy resin, modified amine Curing Agent and reactive diluent;
2, the surface is smooth, beautiful, up to mirror effect;
3, acid, alkali, salt, oil corrosion, especially good alkali resistance;
4, wear, pressure, impact resistance, a certain flexibility;
Service life:
2mm / 8 years, 3mm / 10 years, 4mm / 12 years, 5mm / 15 years.
Technical index:
|
project |
index |
|
|
drying time,h |
Table dry |
≤6 |
|
action |
≤24 |
|
|
Tensile Strength |
≥9 |
|
|
Bending strength |
≥7 |
|
|
Compressive strength |
≥80 |
|
|
Shore hardness |
≥75 |
|
|
Leveling,cm |
≥16 |
|
|
Wear resistance(750g/500r,weightlessness,g) |
≤0.03 |
|
|
Adhesive strength |
≥2 |
|
|
30% resistant to sulfuric acid |
30 days to allow a slight discoloration |
|
|
25% resistant to sodium chloride |
30 days without exception |
|
|
30% resistant to salt water |
30 days without exception |
|
|
Gas-resistant,I20" |
Resistance |
|
1, the base surface treatment;
2, brushing closed base oil;
3, batch scratch epoxy mortar coating;
4, polished, vacuuming;
5, with self-leveling epoxy paint Tu Tu;
Epoxy Mortar Self Leveling Floor
Epoxy Mortar Self Leveling Floor,Yellow Epoxy Self-Leveling Floor,Epoxy Resin Self-Leveling Floor,Epoxy Resin Coated Floor Paint
Jiangmen Kasole Building Materials Co., LTD. , https://www.kasole-paint.com