In the installation of smart parking barriers, we must pay attention to many techniques. At the same time, if used improperly, it will be prone to damage. What if the smart parking barrier is broken? Many of the owners who use Daozha are unable to meet this kind of problem. The way to think about it is to spend some money to ask some professional people to carry out repairs, or to go to the parking lot manufacturer for after-sales service. Although it can solve the problem, it also consumes time and money. Therefore, we must focus on prevention. Attention should be paid to the installation and use of smart parking barriers. The extended period of use is not easy to be damaged, so that the service life of barriers will increase.
1. The installation of smart parking barriers is generally on the level of the road. If there are slopes, attention must be paid to the installation specifications.
2. The installation of smart parking barriers must be carefully examined in various aspects after the line is connected. If the detection is abnormal, it must be reinstalled.
3, the installation of the barrier and the coordination of the local inductance coil is well coordinated, the output coil of the ground coil is twisted to the barrier, and the distance is as short as possible. After the connection is completed, the nest is sealed with dry cement.
4. The ground coil can't be damaged during the laying process, and also try to avoid the joints, otherwise the gate will not normally open and close, and there will be faults such as the vehicle can not automatically fall off.
5. The parking lot barrier system has been adjusted to the moment balance according to the length of the rod before leaving the factory. If the gate rod is lengthened and cut according to the site conditions, the spring force should be readjusted to balance, otherwise the motor overheating and the reduction gear box will occur. Excessive wear and tear; Tips: The specific installation of smart parking barriers will need to be implemented according to the system's related programs.
100% pure PTFE teflon plastic products
Specification
Molded PTFE Sheet
Thickness: 4mm to 150mm; Size: 1mx1m, 1.2mx1.2m, 1.22mx1.22m, 1.5mx1.5m. Density: 2.3g/cc. Produced by compression molding processing, moulding, sintering, cooling of suspension PTFE resin. Low temperature and high...
Skived PTFE Sheets
Thickness: 0.1mm to 6mm x Sheet or Roll; Width: 1m, 1.2m, 1.22m, 1.5m, 2.0m. Density: 2.3g/cc. Produced by cutting and flatting skived rolled sheet. Low temperature and high temperature resistant (-190°C- +250°C);...
Filled PTFE Plates
Thickness: 1mm to 150mm x Sheet or Roll. Produced by compression molding processing, moulding, sintering, cooling of suspension PTFE resin into (color, bronze, glass fiber, graphite, carbon fiber, black, carbon...
Etched PTFE Sheets
Thickness: 0.1mm to 120mm x Sheet or Roll. Sodium processing sheet Produced by sodium treatment of sheet surface according to customers'size requirement. dividing into single-sided and double-sided sodium treatment by...
Expanded PTFE Sheet
Thickness from 0.5mm to 10mm, Size: 1500x1500mm. Density: 0.8g/cc. ePTFE Sheet made from biaxial oriented expanded PTFE Film that is laminated to the required thickness. Expanded 100% virgin PTFE using a..
Extruded PTFE Rods
Dia: 1mm to 200mm, Length: 1m, 2m. Extruded PTFE Rod Produced by plunger extrusion processing of suspension ptfe resin. Pasted PTFE rod Produced by paste push processing of dispersion polymerization ptfe resin.
Molded PTFE Rods
Dia: 50mm to 600mm, Length: 100mm, 200mm, 300mm, 500mm, 600mm, 1000mm. Molded PTFE rod Produced by compression moulding into pure PTFE.
Filled PTFE Rod
Dia: 10mm to 600mm, Length: 100mm, 200mm, 300mm, 500mm, 600mm, 1000mm. ptfe resin into color, bronze, glass fiber, graphite, carbon fiber, black, carbon powder,polyphenylene,anti-static plates,etc
Application:
1 Chemistry industry: used in sealing, pipeline, pipe fitting and high pure agentia household utensils etc.
2. Machine: used in piston ring, guide ring, machine tool guideways etc.
3. Electrical and Electronic Engineering: used in electric wire, electric cable, electrical condenser film, insulation board etc.
4. Construction: use as bridge, tunnel, large-scale chemical industry pipeline, storage tank supporting bearing slipper.
5. Light textile and other industry: PTFE product have nonstick properties, used in spinning, papermaking, foodstuff, rubber, ceramics etc.
PTFE Parts,PTFE Packing,PTFE Film,PTFE Tubing
ZHENJIANG CHUNHUAN SEALING MATERIALS CO.,LTD(GROUP) , https://www.chsealing.com