Â
After the autumn, the weather gradually becomes dry, the moisture in the air is also significantly reduced, and furniture is also prone to "heating" symptoms such as shrinkage of materials, enlargement of gaps, and even falling of tiles. Especially for wooden furniture and floors with special materials, in such a dry season in autumn, the furniture must be fire-preserved to prolong the life of the furniture. So, when autumn is coming, how to deal with the common problem of furniture getting angry?
Â
Â
Increased floor gap
Â
It should be careful not to worry about returning to repair in autumn. When the temperature difference between the cold and warm seasons changes significantly in the spring of next year and the cracks and deformation of the solid wood floor no longer develop, one-time repair will be carried out. This will ensure better results while eliminating the need for repeated repairs.
Â
Autumn is coming, solid wood floor waxing maintenance: wipe the floor clean before waxing, then apply a layer of floor wax evenly on the surface, wipe it with a soft cloth after a little dry, until smooth and bright. Windows should be opened as much as possible for ventilation to maintain air circulation in the house. After a while, when the weather gets drier, you need to use a humidifier to adjust the indoor humidity.
Â
The door frame is very easy to crack
Â
You can use adhesive to fill the cracks in the door cover, and then use the original color paint to repair the door cover. If the door cover material is too thin, it is best to require workers to rework. In autumn, windows should be opened as much as possible to maintain air circulation in the house.
Â
Solid wood furniture is tarnished
Â
You should always keep the solid wood furniture clean. Use a soft dry cloth to gently wipe off the dust on the surface every day, and wipe it with a damp cloth for two or three days. If there are stains on the surface of solid wood furniture, don't wipe it hard, you can gently remove the stains with warm tea.
Â
Use thin glue to separate the solid wood furniture from the contact area with the ground, while keeping the solid wood furniture close to the wall by 0.5-1cm. Avoid too humid environment, so as not to rot wood furniture.
Â
Seamless tiles break off
Â
Remove the mud and sand on the back of the falling tiles, and then mix and paste with cement and glue. It should be noted that if the tiles are only partially peeled off, the mortar on the base layer must not be beaten with force to prevent the originally firm tiles around the pine. The seam can be adjusted between 2 and 3 mm. At the same time, in order to avoid wasting materials, some selected products can be randomly sampled and placed on the ground for non-adhesive trial paving. If it is found that there are obvious color differences, dimensional deviations, etc., and the satisfactory results have not been achieved after the brick position adjustment, the laying should be stopped in time and the material supplier should be contacted for replacement.
Â
Wallpaper corners
Â
Clean up the original glue on the wallpaper, brush some white latex on the back of the wallpaper, apply some water on the front of the wallpaper, and smooth it with a plastic scraper. Finally, attach the bead, and remove the bead after the shade is dry. Due to the relatively dry climate in autumn, the wallpaper and wall cloth must be soaked in water to “make up water†before being applied, and then applied with glue. If you experience blistering of the wallpaper, first use the sewing needle at home to pierce the air bubbles on the surface of the wallpaper to release the gas, then use the needle tube to extract the appropriate amount of adhesive, inject it into the just pierced needle hole, and finally scrape it flat Compact and dry. (Editor: Peter)
Â
Face Mask Machine,Pm2.5 Mask Machine,Filter Mask Machine,Filter Cotton Making Machine
Dongguan Huitong Automatic Machinery Technology Co., Ltd , https://www.medicalmaskmachines.com