After the end of the year, all walks of life must start their own new year busy. Home improvement is no exception. Certainly, the number of parents who will be refitted after the year is certainly not in the minority. Everyone will find that there are many things to pay attention to in order to start construction. If you cannot pay more attention, , may be more effective in the subsequent construction process, after all, a good start is half of success. 
After more than ten days of the New Year, it is actually an opportunity for the owner to check the quality of the decoration and find the lack of opportunities. So today, Xiao Qi will give you some tips on how to start the decoration and make your new year begin. No preparation! 
Construction inspection 
1. The restoration of hydropower 
If hydropower reforms were completed before the year, although hydropower reform projects seldom have problems within a dozen days, it is better to check them at the time of starting and returning to work, mainly on the pipeline interface and on the outside. Some checks, there is the circuit problem, carefully check whether there is a short circuit, short circuit phenomenon. 
2. The resumption of carpentry If the carpentry was completed before the end of the year, then the first thing we have to check after the holiday is to check whether there is any change in the carpentry work already done. If there is a problem of moldy, cracking, or deformation, we must repair it in time. If there is no problem, we can check again. Polish once and paint over again. However, if the carpentry is not completed before the holiday, then when resuming work, it must be ensured that the carpenter's craftsmanship is consistent after the festival. 
3. Bricklayer's return to work In general, bricklayer work should be done before the holiday. If it can't be done, we must also ensure that all the floors or walls in the room are finished. Because of the long time of stagnation, the influence of the temperature and humidity in the air will cause the tiles to be well produced. Empty drums. 
4. The painter's return to work Prolonged drying of the wall may cause cracking, and when the pre-holiday rush, it may not wait until the paint is dry on the base paint, check the ceiling, the joints of the partition have no cracks, if there can be brushing putty to remedy . 
Material inspection 
1. Cement: First of all, it is necessary to prevent moisture from failing, and secondly, to look at the ex-factory date. Exceeding the shelf life will reduce the strength of the cement, but if the cement has already become a piece of hard block, it is recommended that you do not continue to use it. 
2. Timber: Check whether there is moisture in the wood. When buying a lot of plates, it is recommended to seal the paint. This will be more conducive to the preservation of wood. If the wood is cracked or peeled due to excessive drying or humidity in the room, it is recommended not to continue. Use as well. 
3. Putty: Years ago, no putty putty recommended to not use it, after a long period of storage of putty fermentation has not been good adhesion. 
4. Steel materials: steel materials that did not have time to do rust-proof treatment before years ago should be treated with rust removal before use.
Renovation preparation
Pvc Solid Color Edge Banding Series include that: All kinds of single color, also single color with emboss surface, smooth surface, high gloss surface or super matt surface. It include thin series solid edge banding, and extrude solid colors.
We mainly supply customize color and size as per request. Size ranges 0.35-3.0mm thick and 12-620mm width. We adopt high quality PVC resin, Germany exported ink and UV. Strict quality control system to keep the quality of Pvc Edge Banding.
Pvc Solid Color Edge Banding
Pvc Solid Color Edge Banding,Solid Color Of Pvc Edge Banding,Solid Color Flexible Pvc Edge Banding,Wood Grain Solid Color Pvc Edge Banding
Sinowolf Plastic Dekor Co., Ltd , http://www.sinowolfdekor.com