The decoration of a new house will inevitably lead to omissions. For example, the wall and floor tiles do not fit together, or the construction site is in violation of construction safety. Experienced friends all know that the surface is no longer useless. All kinds of problems began to appear, then regret later to be late, so it is very important to lay a good foundation, today Xiao Bian will give you an analysis, what are the common omissions in the decoration!
First, wall tiles are not seamed, heating nozzles are not protected
The lack of seams in the tiles results in excessive gaps between the tiles and corners. Another situation is that the wall tiles have not pressed the floor tiles, resulting in gaps at the junctions of the tiles. These conditions are caused by the low construction quality during the construction process.
Xiao Bian reminds: Wall tiles don't make joints leading to large gaps between floor tiles and corners, which is a common problem in home decoration. Although this situation can be post-repaired, it will result in unsightly joints between tiles.
The nozzles of the heating pipes were completely exposed before the heating was installed, and no corresponding protection was provided.
Xiao Bian reminded: There are many materials on the construction site, and the nozzle of the heating pipe is not protected. Once a heavy object hits the heating nozzle, it is likely to cause deformation of the nozzle, leakage of water after installation, and damage to the floor.
Second, wire privately connected
When wiring wires for house renovation, casually connect wires.
Xiao Bian reminds: To avoid these situations, first of all, ask an experienced electrician. Secondly, the plastic sheathing wires or other insulated conductors used in the wiring should be protected by pipes and cannot be buried directly in the cement or lime paint layer. Because the wire directly buried in the wall has been "dead" in the wall, it can't pull out, and it can't be pulled. Once a certain section of the line is damaged, it needs to be exchanged. Only the wall surface can be cut and re-routed. There can be no joints, because the joints are buried directly in the wall. Over time, the insulation tape at the joints will age, and long-term buried in the wall will cause leakage. Therefore, it must not be in violation of the regulations and random wiring, so as to avoid accidents such as leakage.
Third, damage to the wall does not change
Some holes can be seen on some bricks and broken, but the construction team is too cumbersome to replace them with new bricks.
Xiao Bian reminds you to be careful when you check the wall tiles, and that damaged bricks should be promptly replaced so as not to affect the overall appearance of the wall.
Fourth, the construction site violates the construction safety regulations
In addition to finding that some of the heavy objects were piled up in a corner of the room, it was found that the construction ladders did not have any fixed measures, and that construction workers were still smoking while working on the construction site.
Xiao Bian reminded: In order to protect the personal safety of construction workers, the ladder should be fastened with a safety rope. The non-slip material on the foot of the ladder not only can avoid accidental injury such as falling people when working on a smooth surface, but also can effectively protect materials such as floor tiles or floor from wear. In addition, it needs to be emphasized that there are many materials on the construction site and smoking is strictly prohibited to prevent fires.
Spring decoration knowledge
Carbon crystal is a kind of modified purification of carbon particle heating product,which the short carbon fiber is modified by ball milling processing,and made into microcrystalline particles, then add far infrared emission agent, with special craft synthetic made heating element. High quality carbon particles can generate heat more evenly,more efficient.
By continually practiced and compared,we have applied most advance infrared heating technology to improve the quality of our panel heaters.
Infrared Radian Heater,Portable Far Infrared Radiant Heater,Far Infrared Radiant Heaters,Far Infrared Heating Radiator
Shandong Dexiang Electrical Technology Co.,Ltd , https://www.infraredroomheater.com