Spring is the peak season for decoration. Especially for the South, the moisture-proof decoration in the spring is the key, but fire and circuit safety cannot be forgotten. Fire protection is mainly aimed at the north of the spring dry weather is easy to cause decoration fire. The protection against electricity is due to the fact that the circuit is vulnerable to short circuits after moisture in wet weather.
Spring renovation can not ignore the fire at the site. Renovation site needs to do a good job in all aspects of fire prevention measures, equipped with fire fighting equipment. Specifically, fire prevention can also start from two aspects to prevent it from failing.
The first is to start with decoration materials and prevent fires. Including the selection of ceiling materials, cabinets, electrical circuits and other choices and fire prevention.
Secondly, at the construction site, attention was paid to the strict regulation of construction operations to prevent fire caused by improper operation.
In wet weather in spring, the circuit is susceptible to accidents caused by short circuit after damp. At this time, attention should be paid to the standardized operation of the circuit modification. Pay special attention to the following points.
First: In places where balconies and other places are prone to rain, be sure to wrap copper wires exposed on the outside of the wires to prevent them from being short-circuited after getting wet. This is especially true for wires that wrap around damp wood keels, large core boards, and other wood products.
Second: Temporary wires on the renovation site cannot be directly placed on the ground. The live decoration tools are also best hung on the wall.
Third: Before working underground, you need to pay attention to the necessary cleaning of the site. The switches for the motors, circuits, and circuit master valves must be unplugged and turned off.
Spring decoration knowledge
This aluminum alloy and MC nylon sheave hoisting tackle possesses light dead weight, which is equipped with the aluminum alloy side panel and the MC nylon sheave. This Single Sheave Pulley Block is the open type. Our product can be used for lifting heavy objects and other operations in the line construction.
Our iron hoisting block is widely applicable to the erection of overhead line structures, lifting equipment, and other hoisting operations. This product is classified as hook style (G), ring style (H), or clevis style (B). Thus, the style our customer needs must be clearly indicated in the contract when the order is placed.
Hoisting Tackle,Nylon Sheave Hoisting Tackle, Single Wheel Block, Dual Sheave Hoisting Tackle, Open Type Pulley Block,Stringing Conductor Pulley Block
NINGBO MARSHINE POWER TECHNOLOGY CO., LTD. , https://www.marshine-power.com