For consumers who are paying more and more attention to the quality of life, no matter the size of the bathroom, a bathroom partition can not only improve the quality of life, but also effectively create dry and wet separation, which also plays a certain role in daily cleaning and maintenance. However, for the sanitary partition, many people are in a strange stage. In this issue, the small series starts from the material and slowly analyzes for everyone.
Bathroom partition material
First, the moisture board
The moisture-proof board is added with a certain proportion of moisture-proof particles in the production process of the substrate. It is made of multi-layer special fiber material, impregnated with a proper amount of phenolic resin, and then made by high temperature and high pressure. It is suitable for application in humid environment and cross-section water swelling. The degree has dropped significantly.
Second, PVC board
The PVC board is a kind of sheet made of PVC as a raw material and has a honeycomb structure in cross section. It is a vacuum plastic film used for surface packaging of various panels. It has good acid and alkali resistance, waterproof, flame retardant, anti-mite, light weight, heat preservation, sound insulation and shock absorption characteristics. It is an ideal substitute for wood, aluminum and composite sheets.
Third, tempered glass
Tempered glass is a kind of prestressed glass that belongs to safety glass. Flat steel and curved tempered glass are all safety glass.
Fourth, metal materials
In addition to good waterproofing, the bathroom partition of metal material has high strength, good rigidity, light weight, energy saving, easy installation, no deformation, strong recyclability, large load capacity, and good sound insulation. Insulation, heat insulation, moisture resistance, fire prevention effect, non-toxic environmental protection and many other advantages.
Fifth, artificial sheet partition
One-piece molding, chamfering, beautiful appearance, no seams and seams, matching with novel hardware accessories, the overall appearance is the same. It has good moisture resistance, impact resistance, stain resistance and easy cleaning.
Sixth, natural stone partition
The structure of natural stone is solid, the texture is good, and the durability is long, but the overallity is slightly poor, the cost is high, and it is easy to stick to the alkali and yellow, and the maintenance is difficult.
Seventh, plastic partition
Although the plastic partition is waterproof, it is not resistant to high temperature, is not resistant to scratching, is easily deformed and polluted, has less color choice, and has a lack of overall feeling of plastic or aluminum edge, and has a poor texture.
Bathroom partition assembly process
1, install the sealing strip
In order to prevent mold, before adding aluminum strips on the side of the bathroom screen, seals should be installed to seal, mold, and mute.
2, the connection frame
After the sealing strip is installed, the glass is embedded in the aluminum strip, the aluminum strip can protect the glass, and the aluminum strip is used as a frame, and then fixed to the wall through the frame connection.
3, fixed with screws
After the aluminum strip is fastened, the aluminum strip is fixed with the glass, the aluminum strip and the aluminum strip by screws to form a frame. Mounting screws is critical during assembly. The screws need to be tightened to ensure that the attached frame does not fall apart.
4. Place the frame in the installation position
After the frame is assembled, it is transferred to the bathroom. The glass as the sliding door is separately moved to the bathroom, and the foam can be protected under the cushion. The assembled frame is then placed on the retaining stone strip. Care should be taken when placing it to avoid scratching the tiles on the wall twice.
Our carbon brush has the advantages as:
1)Small spark,low noise
2)Anti-electrical interference
3)long use life,safe and so on
Our carbon brush usage and specifitions
This carbon brush use for the drill machine and the angle grinder machine and so on.
1)Supply carbon brush replacements for Hitachi series, Makita series,
Bosch series, Dewalt series, Matabo series, Black & Decker series and so on,
2)Our products have characters as long life, low spark,low noise,safe and reliable and so on.
3)Non-standard brush can be designed and be manufactured per buyer's drawing or sample.
3)This type is used for power tool Maktia series.
For makita power tools brush for bosch power tools small color box packing
Keyang Carbon Brush,Keyang Grinder Carbon Brush,Keyang Carbon Brush For Power Tools,Keyang Carbon Brush Holder, Keyang Carbon Brush Assembly
Haimen Hailing Carbon Industry Co., Ltd. , http://www.carbonbrush-hl.com