· Omron released more than 20 new factory automation products

In the upcoming April 2016, Omron Group will officially release new 20 types and 952 models of “industrial control” new products. More than 20 new products for factory automation will be released soon, and Omron will conduct unified design and development based on the common concept.

According to reports, the new Omron industrial control products to be released this time are not only unified in design concept and size, but also equipped with the “Push-InPlus” terminal block developed by the company itself to ensure the small size of the “control cabinet” used in the production site. Reduction, high reliability, and reduction in manufacturing man-hours. At the same time, Omron builds a new service and support system for control cabinet production based on a unified design concept. The provision of industrial control products and related services will fully innovate the control cabinet concept, and serve all the people involved in the control cabinet, and innovate the entire process of designing the control cabinet to the factory.

In recent years, the manufacturing site has faced various changes in the market environment, such as global development and diversified product demands. The development trend of high-end production equipment is obvious, and the demand for industrial control products installed in the control cabinet is also Increasing. At the same time, the shortening of the new product launch cycle has made the rapid introduction of production equipment a necessary condition. On the other hand, the labor force dominated by skilled workers is decreasing, and the difficulty of recruiting workers is quite common. In this regard, Omron has conducted a comprehensive investigation of the design of the control cabinet and the problems and needs in the production process for 300 global companies to solve the problem of “small size and space saving” for equipment manufacturers and control cabinets for equipment manufacturers and control cabinets. The project facing the "introduction of the import period" and the "global response" will introduce a series of industrial control products based on the unified concept, and provide a comprehensive service and support system.

- miniaturization and space saving"

Through the unification of the product design concept and size in the control cabinet, Omron realized that the horizontal space in the control cabinet was reduced by 50% compared with the previous one, and the upper and lower cuts were 20%, and the volume was reduced by 30%;

- "Introduction of the import period"

By using the "Push-InPlus terminal block" independently developed by Omron, it is possible to reduce the man-hours by 60% compared to the conventional "screw terminal block" wiring method. Greatly improve wiring operability and reliability. With the launch of the dedicated website "PanelAssistWeb", the "product selection function" can be used to easily retrieve the required industrial control products, and the selected products can be generated as "parts list" for management; secondly, through "PanelAssistWeb", At the same time, it provides a special "parts download library" for electrical control CAD to improve design efficiency. The “Hot Simulation” function can control the heat of the control cabinet in advance. The “Terminal Table Auxiliary Tool” can provide services from the selection of the terminal block, installation space, and selection of applicable wires to help efficient and fast design.
In addition, Omron can also provide training aids and technical instruction materials for the design of control cabinets and the training of relevant engineers to help the short-term production of control cabinets and solve the problem of insufficient manpower;

- "Globalization Correspondence"

In terms of exporting to control cabinets, Omron has set up emergency delivery services at outlets in 35 major countries around the world. At the same time, standard stocks are ensured for all products in the control cabinet, including new products to be released and existing products.

Concerned about surprises

Stainless Steel Twill Dutch Weave Mesh, this kind of Woven Steel Mesh is weaved by a special weave technology, which integrate the Dutch weave and twill weave.  The thicker warp wire and the thinner weft staggered. Each warp wire shuttles up and down with the weft wire.

Features: Stainless Steel Wire Mesh screen has the advantages of smooth surface, high hardness, constant mesh, no deformation, high temperature resistance, corrosion resistance, flexible network, excellent filtration performance, good filtration accuracy, high load intensity, high temperature resistance, low temperature resistance and so on

Material: SS304, SS 316,SS316L

Use: Stainless Mesh is mainly used for gas, liquid filtration and other medium separation; widely used in precision pressure filter, fuel filter, vacuum filter, filter material, do aerospace, oil refining, pharmaceutical, sugar, oil, chemical industry, chemical fiber, rubber, tire manufacturing, metallurgy, food, health industry and scientific research.

Specification: The standard roll width: 1m-2m. Standard roll length: 30-50m.The steel mesh in special width and length can be produced according to customers` requirements.

Structural drawing:

The warp wire (D1) : all longitudinal braided lines.

The weft wire (D2) : all horizontal weaving lines.

Aperture : the distance between two meridians or two weft.

Mesh number: number of mesh holes per inch.

Thickness (T) : thickness of the wire mesh.

Speciation List:

Stainless Steel Twill Dutch Weave Mesh

Stainless Steel Twill Dutch Weave Mesh,Extra Fine Stainless Steel Mesh,Stainless Steel Screen Mesh,Twill Dutch Weave Mesh

Anping Xinzheng Metal Wire Mesh Co., Ltd , https://www.sievingmesh.com