Split bricks are mainly used for the facades of high-end buildings such as villas, houses, European styles, and American styles. Compared with whole bricks, the decorative effect is more natural, nostalgic, atmospheric, and noble. The following Xiao Bian gives you a detailed introduction to the differences between splitting bricks and splitting bricks.
"Break open brick" is formed by vacuum extrusion. When it is molded, it is double-layered. After firing, it is gently smashed and divided into two bricks. Gu is called "open brick"! Splitting bricks according to different architectural design requirements, the surface can be smooth, rough, can also provide a variety of strong concave and convex lines, and can be made into different patterns of artistic decoration effects, there is a clear three-dimensional.
Splitting bricks From the perspective of building construction, it has a deeper "dovetail trough," and it is securely laid, especially in high-rise buildings. Split bricks are used for exterior walls and grounds as building ceramics. According to the purpose, they can be divided into wall tiles and floor tiles. The former is used for wall decoration and the latter is used for floor laying. Applicable to homes, gardens, parks, square botanical gardens, gardens, factory areas, parking lots, tree pits, greenhouses, providing a more perfect choice. It is a type of ceramic tile.
Split bricks have a good overall effect of pasting exterior walls, so they are widely used in high-end villas, residential quarters, and various kinds of colleges and universities. It is currently the ideal new type of decoration used for decorating the area and highlighting the overall effect. material. The outer wall splits the brick, waterproof and antifreeze, environmental protection and energy saving. Split bricks are of natural quality and simplicity, full of charm and spirituality, and fully meet the antique requirements.
Imitation smashing bricks is a type of brick, mainly in the ordinary brick made matte surface treatment, the general sense of perception, there is no three-dimensional sense of distance, and splitting bricks slightly lower than the grade.
The difference between splitting bricks and splitting bricks is as follows:
1. Uses:
Split bricks are used for exterior walls and grounds as building ceramics. According to the purpose, they can be divided into wall tiles and floor tiles. The former is used for wall decoration and the latter is used for floor laying. Applicable to homes, gardens, parks, square botanical gardens, gardens, factory areas, parking lots, tree pits, greenhouses, providing a more perfect choice. It is a type of ceramic tile. Split bricks have a good overall effect of pasting exterior walls, so they are widely used in high-end villas, residential quarters, and various kinds of colleges and universities. It is currently the ideal new type of decoration used for decorating the area and highlighting the overall effect. material. The outer wall splits the brick, waterproof and antifreeze, environmental protection and energy saving. Split bricks are of natural quality and simplicity, full of charm and spirituality, and fully meet the antique requirements.
The imitation split brick is a kind of brick, the main production and the Fujian region, the main feature is to do a common surface brick on the matte surface treatment, the perception of the general, the distance does not look three-dimensional, and split the brick than the grade Slightly lower, but splitting bricks, the use of high-level technical specifications.
2. Different appearance
Imitation split brick is a kind of brick, mainly produced in Jinjiang, Fujian, imitation open brick is mainly on the ordinary brick made matte surface treatment, the general sense of perception, there is no three-dimensional sense of distance, the grade is relatively low. Imitating split brick bricks is very thin, about 7 mm, bricks are lighter, and high-rise buildings can also be used. There are a variety of colors that mimic bricks, but its color is made of dyes. It is hard and exaggerated and has no natural feeling. It will fade easily after a long time.
The split brick is made of clay as a raw material, and after a series of firing processes, it is split into two pieces by hand or machine along the ribs. Splitting bricks can be roughly divided into two kinds: smooth and rough surfaces. The former is delicate and smooth, while the latter is covered with coarse particles or pits. Both surfaces are very natural. Shop on the external wall of the building, a strong three-dimensional view from a distance, high grades. The brick is thicker, about 11 mm. The color of the split brick is basically the color of the raw material, very natural, and resistant to ultraviolet radiation, never fade. Splitting bricks From the perspective of building construction, it has a deeper "dovetail trough," which is securely laid and has a greater sense of security in buildings.
3 different quality
Splitting bricks with high quality, waterproof and antifreeze, long service life, environmental protection and energy saving, splitting bricks is widely used in high-end villas, residential communities, and comprehensive buildings of various colleges due to its good overall effect of pasting external walls. At present, it is an ideal new type of decorative material used to decorate the area and highlight the overall effect. Breaking through the quality of the bricks is naturally rustic, antique and full of charm.
Imitation splitting bricks also have the characteristics of ordinary bricks, but the overall quality is not as good as splitting bricks.
4. Other identification methods
Listening method: Tap the brick material by hand, and if it gives a squeaky sound, it indicates that its sintering degree is not enough and the texture is comparatively inferior. If you make a slight buzz, the sound is crisp, and its texture is harder. It's a real cracker.
Visual inspection method: Place the bricks on the flat surface to see whether the four sides are completely in line with the flat surface. At the same time, check whether the four corners of the brick material are right angles. Then observe the bricks in the same type and the same type of tiles. The degree of color difference. The splitting bricks have good flatness, no color difference, and uniform outer corners. The quality of a good imitation split brick is also good, but it is small and exquisite, and there is no natural atmosphere that really breaks the brick.
In addition, the price of imitation split bricks is about 20-30 yuan per square meter. Breaking bricks prices slightly expensive.
The above is related to the difference between splitting bricks and splitting bricks. If you want to know more related information, please pay more attention to this site and provide more comprehensive, more detailed and updated information.
Ceramic Bathroom Cabinets Europe and the United States Ceramic Ceramics Electric cookers Staircase Brick Ceramic Mop Pool
Baiji Zhipu Specificly produce and sell various kinds of Vacuum furnace accessories. We are professional in producing vacuum furnace parts and we have a famous brand domestically. Our aim is to produce best quality products and provide best service for customers. Our products have four series branch: tungsten, molybdenum and tantalum parts in all kinds of high temperature furnace; Tungsten Wire rope and other series products for pulling method of all kinds of semiconductor crystal growth; tungsten, molybdenum, tantalum and niobium refractory metals` plates, bars, wires, tubes; various diaphragms and electrodes.
Molybdenum Heat Shield,Molybdenum Crucible,Molybdenum Bar,Molybdenum Foil
Baoji Zhipu Non-Ferrous Metals Processing Co., Ltd. , http://www.czpmow.com