Radiator is a very common heating equipment, it is a new technology, but in the winter, the radiator is very popular with consumers, it has a short installation time, good heating effect. Next, Xiao Bian introduced the construction steps of the radiator and the precautions for installing the radiator.
Radiator construction steps
The first step is to slot the floor or wall
The construction pair can bury the exposed pipelines in the ground, but the depth and width should be reasonable.
Second cloth, laying pipe and retaining slot
The pipelines can be protected according to the customer's needs, and then the system can be closed and pressurized.
The third step, install the water separator
When installing a water separator, it is necessary to maintain the level, so that it can facilitate the smooth flow of water.
The fourth step, install the radiator
When installing the radiator, it should be stable. The valve connection and the inlet and outlet valves should be connected. Then the radiator should be measured for straightness. Use a pipe wrench to tighten the connection.
Step 5: Radiator System Installation Completed
After the entire radiator is installed, it can be used.
Radiator installation precautions
1, to determine the location of the radiator, to determine the location of the heating radiator installed in a good effect, good safety performance.
2. When installing radiators, it is important to note that tightness is critical and must not leak. Then, considering the difficulty of construction, it is best not to change the position of the heating pipe. If this is done, the worker must go to the neighbor’s house. It will cause inconvenience to other people and construction.
3, the heating system test is indispensable, the general workers will set aside the valve on the pipeline, and then in the stamping test to prove that no run, take, drip, leakage of the place to complete the acceptance.
Editor's summary: The construction steps of the radiators and the precautions for installation of the radiators are introduced here, and we hope to help everyone. If you want to know more related information, you can pay attention to this website information.
Radiator Steel Radiator Radiator Construction
Our Graphite Electrode was made of high-quality petroleum coke, needle coke, coal tar pitch and other low-ash raw materials. Processing by calcining, ingredients, mixed kneading, molding, roasting and pressure impregnation at 3000 ℃ high temperature graphite. We offers the most demanded standard graphite electrodes and nipples. Our graphite electrodes include RP, HP and UHP grades. They are widely used in electric arc furnaces (EAF) and ladle furnaces (LF) for the melting of steel, non-ferrous metals and some non-metallic minerals.
Advantage
1. High quality and strictly inspected petroleum coke, needle coke as raw material.
2. Low specific resisvitiy
3. Low conspumption rate
4. Anti-oxidation, uniform strength
5. Good resistance to thermal shock
6. Perfect match betwee body and nipple.
7. Professional , experienced reliable and safe package & transportation
Graphite Electrode,Rp Graphite Electrode,Regular Power Electrodes,Graphite Electrode With Nipples
Carbographite Industrial PTE.LTD , https://www.carbographite.com