According to the survey, nearly 70% of the families have installed a shower room to enjoy the benefits. For the home darling, the experience of quality life is to experience a comfortable and unique shower process in the shower room. However, the explosion of the shower room has become the most worrying point.
What is the explosion-proof membrane of the shower room?
The explosion-proof membrane of the shower room is a kind of safety explosion-proof membrane. It is mainly used for building glass film film in the shower room and bathroom. We all know that tempered glass has “three-thousandths of self-explosion rateâ€, which is a worldwide problem in the tempered glass industry and is also allowed by national standards. Experts also advise consumers to avoid tempered glass self-explosion, the most effective way to prevent glass self-explosion and minimize the loss and damage is to attach a layer of shower room explosion-proof membrane to the glass, the shower room explosion-proof membrane is glued to the shower room tempered glass, will be broken The glass is bonded in place until it is safely removed, thereby reducing possible human injury and reducing the damage caused by the explosion.
How to affix the explosion-proof membrane of the shower room?
First, the preparation of the preliminary work is first to prepare the filming tools, such as tape measure, small wallpaper knife, watering can, water scraping, squeezing water, not riding, large hairless towels and other tools, and then the size of the glass, cut The size of the glass film should match the size of the glass to avoid being too wasteful. Secondly, if you want to make the film quality and effect more perfect, you must first spray the glass environment that needs to be filmed to reduce the dust, so that you can have a good dust-free environment when you stick the film.
Second, clean the glass first under the glass to be cleaned, the large towel can not be washed, so as to prevent the water from flowing to the outside to bubble the wall surface. Cleaning the glass is the most important step in the film. Whether the glass cleaning is clean or not is the quality of the glass film. related. Third, the paste glass film first spray some water on the front and back sides of the explosion-proof membrane of the shower room, it is easy to remove the adhesion on the glass film caused by static electricity, and then peel off the plastic film on the cut glass film, spray water, paste On the glass, then squeeze the water out from top to bottom, and then cut off the extra side.
Fourth, check the paste quality When the glass film is pasted, the quality of the glass film should be carefully checked to see if there are any corners, whether there are bubbles, whether there are wrinkles, etc. When it is determined that there are no problems, it is considered complete construction.
With the explosion-proof membrane attached, the bath is more peace of mind. Of course, the most important thing is the choice of quality shower room. When you buy, always shine your eyes!
Natural Pps Sheet,Natural Pps Plate,Unfilled Pps Virgin Sheet,Virgin Pps Sheet
Ningbo Zero Engineering Plastics Co.,Ltd , https://www.zero-peek.com