Although the bathroom space is not large, but the decoration can not be sloppy, especially bathroom products, if not installed to reinstall the trouble, so many decoration owners will pay attention to the installation details, to the decoration of the master made this or that request, after the installation of the bathroom After that, it is also a science for acceptance. Next, we will introduce the overall installation and acceptance of bathroom installation and various bathroom installation standards.
Bathroom installation and acceptance Raiders
1. Check the bathroom cabinet
a. Flexibility check
The bathroom cabinet can be checked for flexibility. The distance between the door and the frame and the drawer must be in compliance with the regulations, and whether it is flexible, non-friction, whether the door panel is closed and smooth, etc.;
b, the edge to be strong
Edge protection is very important for the protection of the bathroom cabinet. It can check the cabinet and the door edge, whether it is bulging, tearing, etc.
c, contact closely
The distance between the countertop and the wall should be sealed, otherwise it will be easy to store water before the cabinet and wall;
2. Check the floor drain
To see if it meets the requirements, the water on the ground should be drained to the floor. There should be no residue.
3. Check the shower room
The shower room should be carried out with strict assembly process. The appearance of the shower room is clean and bright. The door and the sliding door are parallel and perpendicular to each other. The two moving doors are convenient to open and close, no gaps are closed, and no water leaks.
4. Check stand or basin
The bottom foot of the standing basin shall be firmly connected with the floor. When installed, the feet shall be sealed with silicone and there shall be no leakage. The washbasin should be firm, and the table can be supported by a wooden cabinet. The counter-free washbasin is made of iron and the wall is fixed and then the washstand is supported by the wall. ~12cm; outside the panel should be hanging paste 10 ~ 12cm skirt, can play a role in covering the iron frame, the installation is completed by the wall and around the basin with silicone seal, no leakage.
5. Check the toilet
Check whether the distance between the toilet bowl is reasonable. If the pit is too small and the water tank enters the wall, it will have an effect when used. The toilet bowl should be solid and can be fixed with expansion bolts. It must not be fixed with wooden screws. Some toilet seal rubber gaskets instead of slurry, after the installation of a solid seal with silicone around. Toilet and tank installation location should be accurate. The allowable error for single position is 10mm, and the allowable error for verticality should not exceed 10mm.
6. Check the bathtub
The outlet of the bathtub is preferably connected directly to the spout, and should not be connected by a plastic hose, and at the same time it is opposed to drainage under the open tank. Acrylic bathtub due to human weight and water dynamic load factors, after a long time is prone to cracking seams against the wall, so the silicone seal must be tight.
Various bathroom installation standards
1. Upper basin is 800-850mm away from the ground;
2. The toilet is divided into wall drainage and ground drainage, generally divided into 300mm and 400mm hole spacing, which can be determined according to the drainage system of the entire building.
3. Press the water tank: Press the water tank before the height of the tabletop is 850mm: The height of the tabletop is over 1150mm.
4. Adult urinals are 650-700mm above the ground and children's urinals are 300mm above the ground.
5. Towel ring: about 1000-1400mm down from the ground.
6. Tissue holder: 650mm from the center, 800mm from the rear edge of the toilet
7. Towel rack: 1600-1800mm from the ground
8. Bathtub: The height of the bathtub along the table is preferably 550-600mm
9. Shower: shower top spray center distance 2050mm
10. Hand shower: Center distance 1050mm
Editor's summary: The whole installation and acceptance standards for bathroom installation and various bathroom installation standards are introduced here, and we hope to help everyone. Want to learn more related knowledge can focus on this site information.
Bathroom installation
0
Anfeng Magnets Manufactruing Co.,Ltd , https://www.anfengmagnetics.com