Morning light tile adhesive tile adhesive use method

Tile adhesive is a product that must be used during the decoration process. Don't underestimate this small tile adhesive. If you don't have him, we will be in trouble in the future life. The morning light tile adhesive is also in many tile adhesive in off the lead out, Xiao Bian today to bring attention matters relating to construction methods dawn dawn tile adhesives and tile adhesives for everyone! High energy ahead, please be patient!


晨光瓷砖粘结剂


First, the morning light tile adhesive construction method


The morning light tile adhesive is a liquid product, so it is not necessary to add water and stirring beforehand, and it is enough to use the barrel directly. The specific use is as follows:


1: If you need to use a short-haired roller to roll the surface before painting or renovating the old wall.


2: Before affixing the tile: half an hour or so, use a brown brush or a small roller to stir the adhesive evenly, and then directly apply it on the back of the tile (about 5mm around the perimeter of the brick to prevent the adhesive from flowing to the front). After the surface is transparent, add about one-third of the fine sand with 425 cement and stir it into a mortar. It is also recommended to apply the adhesive once to the wall to be affixed, so that the bonding force is stronger and the waterproof effect is better. It is absolutely not hollow or falling off.


3: Material dosage: This product does not need to add water. It can be used directly after opening the barrel. Single coating layer can be applied for 10-13 square meters per kg of binder.


4: The optimum construction temperature is 5 °C, and the actual painting area will vary depending on the construction method, surface smoothness and construction environment.


Second, the morning light tile adhesive notes


1. The best tile adhesive construction temperature is 5 ° C to 35 ° C, while avoiding too much moisture, and it is important to maintain the ventilation and ventilation of the construction site.


2, the method of blending and stirring the tile adhesive is to first add a certain amount of water in the mixing tank, and then increase the binder by volume, the ratio of water and tile adhesive is 1:4. Use a power agitator for mixing and use low speed (300r/min) until the binder is even.


晨光瓷砖粘结剂


3. The agitated binder is stirred once every half hour and used up within 4 hours.


4. When using tile adhesive, first scrape a small amount of adhesive on the back of the tile with a toothed spatula, then stick it on the surface of the base layer and press it a few times to ensure the bond strength. Be sure to stick it in the proper position for each tile. Do not move it within 15 minutes after it is attached.


Third, the tile adhesive recommended by the brand


Deco


Degao belongs to the French Perry Group and was founded in 1998. After more than 20 years of development, JCDecaux has become the leader in China's special mortar industry. It is mainly trusted by countless users with excellent product quality. Its leading products are: color tile joint filler, Tecco TTB tile adhesive, Degao K11 waterproof paste, Degao beauty grout and so on. With the progress of the times, more and more owners have looked at Degao tile adhesives!


2. Decker


Founded in 1956 in Germany, Black & Decker is a well-known brand in the civil adhesive industry and a global strategic brand created by Henkel Group. It mainly produces construction, stationery adhesives, and civil decoration products. In the past few decades, Black & Decker has consistently adhered to its professional experience and reliable quality to create an extraordinary global strategic brand. And it produces products in 48 countries to meet the needs of different users around the world.


In addition to the morning light tile adhesive, Xiao Bian also introduced a good brand of the above two tile adhesives. These two brand products have certain guarantees in terms of quality and after-sales. You can rest assured to buy! Want to understand For more decorative advice, please pay attention to the decoration home network!


It can slow down the reaction, maintain chemical balance, reduce surface tension, prevent light, thermal decomposition or oxidative decomposition. it mainly includes lead salts , metal soaps, organic tin , organic antimony, organic rare earths, pure organic compounds. Thermal stabilizers commonly used in industry mainly include lead salts, metal soaps, organic tin, organic antimony, organic rare earths, pure organic compounds, etc.

Stabilizer

lead salts, metal soaps, organic tin, organic antimony, organic rare earths, pure organic compounds

Henan Shunbang Chemical CO.,Ltd , https://www.pvcresinchemical.com