Warehouse-style semi-trailer tires reduce wear and tear

Driving skills to reduce tire wear

1. When the vehicle is parked on the way and stops at the stop, it is necessary to develop the habit of safe gliding.

2. Do not start excessively so as to avoid tread wear due to tire and ground drag;

3. When the vehicle is going downhill, the appropriate speed should be controlled according to the size, length and road conditions of the slope. Qingdao Guoyun test driving tips, this can avoid or minimize emergency braking, reduce tire wear;

4. The vehicle should turn according to the curved road conditions, turning radius, generally appropriate deceleration, so as to avoid the effect of inertial force and centrifugal force to accelerate the unilateral tire wear;

5. In the ups and downs of the road, one must choose the road surface, reduce the collision of the car tires and the road, to avoid damage to the machine parts and tires, and second, to slow down, to avoid tire bumps and strong vibration;

6. When turning vehicles, passing cars, passing through intersections, narrow roads, railway crossings, etc., you should master the appropriate speed and pay attention to the dynamics of roads, pedestrians, and vehicles, prepare for braking, reduce frequent braking, and avoid emergencies. Brakes, thereby reducing tire wear;

7. When driving in the highway maintenance construction area, apply a slow-moving method to select the road surface to avoid excessive impact on the tires, or even be stabbed or scratched. 8. Through a muddy section, choose a more solid, non-skid place to pass through. , in order to avoid tire sags, in situ idling, severe vibration caused severe tire and sidewall cuts, scratches; maintenance of semi-trailer tires as the vehicle's "foot", tires play a crucial role in driving safety, so for tires Conservation is particularly important.

Often it is under the sun, it is not often opened, or the car is washed immediately after it is returned. This is not good for the tires, because the tires are still hot when they are stopped. In case of cold water, the tires are more likely to age or change. Hard. Here we introduce some small ways to help tire maintenance.

1. The tire pressure check must be performed every month: tire under pressure and over pressure will lead to abnormal wear of the tire, shorten the life of the tire, increase fuel consumption and even increase the chance of puncture. Tire experts recommend that we check the tire pressure once a month to ensure that the tire pressure is normal. The tire pressure check must be performed with the tire in a cool state. Tire pressure gauges or tire pressure monitoring systems (TPMS) can be used to check tire pressure. The vehicle specification will state the standard tire pressure under various load conditions of the vehicle. At the same time, this parameter will also be listed on the driver's door label. The standard tire pressure for tires is approximately 2.2 to 2.6 bar. Excessive tire pressure tends to increase tire wear and may cause punctures, while too low will increase fuel consumption and bumpiness of the vehicle. In general summer tire pressure may be slightly lower and winter may be slightly higher.

2. Pay attention to the four-wheel transposition: If the vehicle has a problem of running deviation, steering wheel sinking, and tire wear on one side, these phenomena are to remind the owner to immediately adjust the vehicle four-wheel alignment. Due to the steering wheel, the front wheel wears faster than the rear wheel. To extend the service life of the tire, the tires are regularly replaced, which results in uniform wear. Auto repair experts recommend that the front-wheel-drive vehicle make a four-wheel-change every 8,000 kilometers. Asahi Trailer Factory 3. Always pay attention to the wear mark of the tire: The wear mark of the tire is located in each main drainage groove of the tire and is a rubber boss with a trapezoidal section. When the tread is worn to the level of the wear mark, the tire must be replaced.

In the rainy season, in order to prevent the vehicle from slipping on the accumulating surface, the tread depth must be maintained at 3mm or more. 4. The tires also have shelf life: tires are rubber products, so there will be rubber aging. The shelf life of tire rubber is generally 4-5 years. Tire rubber accelerates aging after the shelf life, resulting in reduced tire performance. For example, "9MCR0810" is the tire production date code. Among them, the last four “0810” indicate that this tire was produced on the “8th” week of “10”. 5. Not all tire damage can be repaired with tire repair: Not all tire damage can be repaired. In the following cases we must replace the new tires: 1. Tie the nails and nail hole diameter greater than 6mm. 2. Shoulder or sidewall screws, cracks or leaks. 3. After using the tire reinforcement of the tire reinforcement technology, the low tire pressure travels a certain mileage. 4. The tire leaks close to zero tire pressure for a certain mileage.

Warehouse-type semi-trailer is a common semi-trailer vehicle, consignment station, and indispensable transportation in the express company. Warehouse-type semi-trailers are used to pull simple goods such as vegetables, fruits, clothes, electrical appliances, and other daily necessities. For power engineering, communication engineering also played a very big role. For engineering equipment, Xutong Trailer Factory is transported by warehouse gate semi-trailer. 1. The model design of the vehicle model and fence structure is combined with the user's cargo category. It is reasonably designed to fully reduce the weight of the passenger compartment under the condition of load. The structure is simple and applicable, and the demolition is convenient. It reduces the investment cost for the user and creates more profit value.