With the development of the stone care industry, business owners are worried about the rising labor costs. How to choose a durable and energy-efficient equipment? How to choose the right cost-effective products?
Performance/Cost is the price/performance ratio and is the ratio of performance to price (Performance/Cost). The greater the ratio, the higher the cost performance. It should be noted that performance and price are broad. Performance includes product use, aesthetics, and service. The price includes the purchase price and the repair cost incurred during the use, ie the cost of the entire product life cycle. The price/performance ratio, the “performance-price ratioâ€, is used to weigh the quantification of goods in terms of objective buy-out. Cost-effective = performance / price (capacity / price) [1], reflecting the unit pays for the performance of the purchased goods. Cost-effective, value for money, buyers can consider the shot. The change in price/performance ratio can be divided into three types. The increase in cost performance may be due to the fact that the rate of performance increase is greater than the rate of price increase, or the rate of performance reduction is lower than the rate of price reduction, or the price is lowered due to performance increase; the cost performance is reduced, the relationship is opposite; , indicating that the rate of change in performance and price is the same. When buying a crystal machine, it is very helpful to consider the price/performance ratio. Conversely, focusing only on low prices tends to ignore performance shortfalls.
A crystal machine with superior performance must have the following conditions:
1, the choice of body materials
A. The outer part of the outer casing is made of aluminum alloy or stainless steel, which is mainly resistant to corrosion and rust; the iron type is easy to corrode and rust, and may cause secondary pollution of the stone to produce rust spots;
B, the comparison of the power cord, choose not easy to break the line (the rupture will cause electric shock!), such as good quality PU leather or rubber leather can be cold to minus 40 degrees Celsius, no cracking; also a low-cost PVC The leather line, under severe cold weather conditions, can cause breakage and can not be straightened and twisted into a mass that is difficult to straighten.
2, operational stability
When the operator operates the device, the product with good stability does not jump, the resistance is small, the operation is easy, and the work fatigue is reduced.
3, motor performance
What is a good motor? The appearance of the motor of the crystal plane machine is not different, and it is often wrong for most people to think that the appearance of the motor is a good motor. The motor is mainly composed of copper wire and silicon steel sheet, of course, there are other accessories; good materials can not make good products without good craftsmanship.
Judging 1 method:
1. Noise (no abnormal noise, no noise), and the noise is smooth;
2, the vibration is small;
3, the temperature rise (degree) is low, ≤ 50 degrees Celsius;
4, the torque is large.
Judging 2 methods:
Use professional equipment testing.
Then a small motor can meet these conditions, so it is a good motor!
4, the performance of the gearbox
Noise (no noise, no noise), smooth noise; but small noise is not necessarily good, but loud noise is not a good product. At this point, you must choose a manufacturer that is technically trustworthy.
5, the overall performance and efficiency of the product
There are two combinations of motor and gearbox:
1. The motor shaft and the gear box are directly hard-connected. The advantage is that there is no broken connection actuator; the disadvantage is that once the damage is caused, the maintenance cost is too high or the maintenance cannot be repaired.
2. The motor and gear box are installed separately, mainly by connector transmission. The advantage is easy replacement and low maintenance cost. The disadvantage is that some products use unreasonable drive connectors to cause non-durability. The drive connector used in the company's equipment can be guaranteed for 3 years.
There are devices with different powers, different speeds and weights on the market. How to determine the products you want? The continuity of the equipment? The comparison of different power, speed and weight, and the operation skills can reflect the efficiency. In the comparison of products with the same power of 175 rpm and 200 rpm or more, it is very important to master the time and speed of the operator. If you don't master it, the crystal surface treatment will not achieve the effect. The performance of the company improves work efficiency and saves labor costs.
170 rpm will increase by 20%-30% than 200 rpm; two equipment operators must change their operating habits to improve efficiency.
The combination of equipment, materials, craftsmanship, skills and methods will give the best performance and results!
6, after sales service
The manufacturer's repair service response is fast enough! Is the supply of parts timely? Is the warranty year of the product reached? These are all factors to consider.
Shower Tray
Picking the right shower tray can be difficult given the huge array of options that are now available. The first thing to consider is the space available as this can quickly narrow your options down making the decision easier however if a large showering area is desired then there are almost endless possibilities. Apart from the obvious size considerations, expect to have to choose which material, shape and colour you require.
- Our products are made of high quality Acrylic
- 40% lighter than classic stone resin
- Multi composite -polymer stone resin
- Flat top tray ledge
- Torion technology for rigidity
- antiskid
- one person installation and handling
- Size and shape also can base on customer's design.
Shower Tray
Acrylic Shower Trays,Square shower tray,Rectangle Shower Trays,White Shower Tray ,Sector shower tray,antiskid shower tray
Dongguan Horizon Technology Development Co., Ltd. , http://www.horizontub.com