How to choose a qualified shower room? With the improvement of living standards, the pursuit of quality of life has become a consensus of quality people. The quality shower room is not only a daily necessities, but also an artwork that is the finishing touch in the overall decoration and highlights the owner's taste. Therefore, the issue of the shower room purchase is very important. The following Xiaobian consulted the designer of the Beit shower room and explained in detail how to buy a qualified shower room.
Beth shower room
Foshan Gaoming Beite Sanitary Ware Co., Ltd. was founded in 2002. It specializes in the design, production and sales of high-end and simple shower rooms. It is committed to manufacturing safe, durable and user-friendly shower rooms for consumers.
The company has a professional technical team composed of senior mold engineers, structural designers and mechanical engineers, and has a high-quality professional management and marketing (agent) team, products sell well all over the country and exported to Germany, the United Kingdom, Spain , Italy, the United States, Australia, New Zealand, Russia, Mauritius and more than 40 countries and regions.
Beate shower room is a good choice for showers
1, see the glass
1 See if the glass is transparent, with no impurities, bubbles, and other defects. Analysis: Impurities in the production of glass materials or defects in the process will cause defects such as specks and bubbles in the glass, reducing the hardness and strength of the glass.
2 See if there is 3c mark certification on the original glass. Analysis: 3c certification is the abbreviation of China's mandatory product certification, shower products can not be sold without this logo.
3 to see a complete analysis of the tempered glass debris template: According to national standards, the safety of broken glass per 50 * 50mm area to reach 40 or more.
2, see aluminum
1 to see the hardness of aluminum analysis: shower room aluminum often need to support the weight of tens of kilograms or even hundreds of kilograms of glass, if the hardness and thickness can not be, shower service life will be very short, the hardness and thickness of all aluminum is an important assessment index. The qualified aluminum thickness of the shower room is all above 1.2mm, and the amount of aluminum that goes into the rails is 1.5mm or more. The hardness of aluminum can be tested by hand-pressing aluminum frames. Aluminum materials with a hardness of 13 degrees or more are difficult for adults to deform by hand.
2 See if the surface of the aluminum is smooth, with or without chromatic aberration, trachoma, and profile finish. Analysis: When used aluminum scrap material is processed, the smoothness of the surface treatment is not enough, there will be obvious color difference and trachoma, and the special profile of the smoothness is dark.
3. Look at the pulley
A look at the material of the pulley and the sealing of the wheel seat. Analysis: The wheel seat of the pulley should be made of materials that are resistant to pressure and heavy, such as 304 stainless steel and high-end synthetic materials. The seal of the wheel seat is good, water vapor is not easy to enter the wheel, and the smoothness of the wheel is guaranteed.
2 Look at the compatibility of pulleys and aluminum rails: pulleys and rails must be tightly fitted with small gaps, and they should not fall off when subjected to external forces to avoid safety accidents.
4. Look at the adjustment function of wall materials and wall clips
Analysis: The wall material (wall clip) is the aluminum material that connects the shower room and the wall. Because the tilt of the wall and the offset of the installation will cause the glass of the wall to distort, and then the glass will blew. Therefore, there is a vertical and horizontal adjustment function for the wall material, so that the aluminum can be fitted with the wall and the installation of the distortion, eliminate the distortion of the glass, to avoid the glass blew.
5. Look at the stability of the shower bar
Analysis: The shower rod is an important support to ensure the stability of the frameless shower room. The hardness and strength of the rod is an important guarantee for the impact resistance of the shower room. It is recommended not to use a stretchable lever, which is weak.
6. Look at the watertightness of the shower room
Brief analysis: The main observation site of the watertightness of the shower room is the joint between the shower room and the wall. The joint between the two doors and the door. 3 The hinges are water-tight. - The hinges are often not good because of the water activity. 4 Shower room The base of the base of the stone, the connection of the bottom pot 5 to see the sealing properties of the strip and the strip 7. To see whether the product design humane analysis: boutique rack, sealed magnetic stripe, buffer device.
8. Look at the certificate
Analysis: Product quality inspection certificate and patent certificate are the direct reflection of product quality. 1 see 3c certificate 2 see quality inspection certificate 3 patent certificate
Reminder: For more information, please pay attention to the information on this website , or you can visit our offline experience directly.
More exciting recommendations
Huida bathroom prices
American standard bathroom official website
Faenza bathroom how
Wrigley how to bathroom
Kohler bathroom how
Sanitary Ware Top Ten Brands
Shower Room Shower Room Brand Beit Shower Room Glass Door Price Stainless Steel Decoration Design Glass Glass Door
Various Shape Activated Carbon
Various Shape Activated Carbon,Spherical Activated Carbon,Bulk Activated Carbon,Coal Based Spherical Activated Carbon
NINGXIA TIANFU ACTIVATED CARBON CO.,LTD , https://www.tjfyhxt.com