What is floor wax

First, the introduction of floor wax

In general, the floor wax white oily advanced solid wax, with flavor, high temperature is oily semi-solid, low temperature was a hard solid, can quickly infiltrate the material pores, polished with a high-speed polishing machine or floor cleaning machine, so that the ground is very Strong gloss, high wear resistance and sealing effect, make the rough surface a hard protective film, especially non-slip, scratch-resistant, wear-resistant, effectively prevent the erosion of water, oil and other substances. Ingredients: Silicone oil, special anti-slip agent, antistatic agent, natural plant wax Application scope: Solid wood floor, composite floor, marble, tile and hard plastic, paint and other ground. There are four kinds of floor wax: aerosol, water (spray), paste (rubbed), solid (coated).

Second, the role of floor wax

The role of floor wax is mainly to clean, moisturize, protect and polish.

1. Cleaning: For floors that have just been renovated, timely maintenance, use of floor wax, can form a layer of protective film on the top plate, isolate the floor and scale, so as to avoid direct contact with the floor and even penetrate the interior of the paint, resulting in inconvenient cleaning in the future .

2. Moisturizing: The floor is gradually formed into a “oil board” through continuous waxing, and the moisture in the floor is not leaked, resulting in dry cracking, nor is it absorbed to cause expansion, thereby maintaining the floor without deformation and cracking;

3, protection: floor wax can maintain the appropriate paint on the floor surface paint, even if there is direct sunlight does not change color;

4. Polishing: After using the floor wax, it can improve the floor brightness, maintain the floor elasticity, and the effect is better than once.

Second, the floor wax to buy skills

  

With the increasing use of wooden flooring, floor wax products are also increasing, and the endless number of floor waxes on the market, so that consumers do not know how to choose. Here we come to know the floor wax to facilitate our choice. The form of floor wax is classified into solid, paste, and liquid, in which the sales volume of solid wax is gradually reduced due to inconvenient use. Compared with this, the sales of paste and liquid waxes are booming. The floor wax is divided into two categories, namely no-buffing and painting after polishing. After the general solid wax is rubbed, it needs to be polished. If it is hand-polished, it takes time and effort, and it is easy to control the floor with a wax amount. Even if the machine is waxed, if the amount of wax is not controlled, it is also easy to use the floor to make a flower. The main role of floor wax is to form a protective film on the floor, polish, extend the life of the floor, make the floor more beautiful.

In addition, we can also choose according to the use of the type of floor wax in the selection of floor wax, floor wax pressure tank floor wax, hand spray bottle floor wax, canned solid floor wax, bottled liquid floor wax and high-grade wood floor wax Most of the floor wax is not diluted, pressure tank floor wax, spray directly on the floor or sprayed on a dry towel, and then wipe with a towel to spray bottle floor wax, spray directly on the floor, After it is dry, it can be polished with a flat plate. Canned solid floor wax needs to be applied to the floor with a sponge. After it is dried, it can be strongly polished with a towel. Bottled liquid floor wax, need to use the sponge to smear on the floor, wait until it is dry and then use a towel to polish. High-grade wood floor wax, because its composition mainly comes from natural beeswax, needs to be applied to the floor with a sponge first, and after it is dried, it can be polished with a towel.

Third, the floor wax cleaning and maintenance

  

Before daily maintenance of the floor, you should carefully clean the floor, and then use the bottom wax until it is dry, use a clean cotton soft cloth or wax machine to wipe the high-gloss floor evenly painted the ground, to be completely dry, on the way coated 1~2 Layer, dry thoroughly. Each time you have to wait until the last layer of wax has dried, you can add a layer of wax to the upper layer and wait until it is completely dry and polished. If only part of the area is to be repaired, only the wax can be repaired. After a long time, the wax surface of the area where it is often active will wear out badly, and it is necessary to clean the wax layer of the floor. With wax surface cleaners, this work can be done well. After the cleaning is completed, it is necessary to polish again.

The use of floor wax has certain risks. Floor wax belongs to inflammable and explosive dangerous goods. Especially in the process of waxing, the volatiles in the floor wax will become solids and adhere to the floor. At this time, the content of volatiles in the air will gradually increase to the extent that the open flame is flammable. Therefore, in the waxing of the floor should open the window ventilation, so that the concentration of chemical substances evaporated from the floor wax will not cause harm, while not smoking in the waxing place, and try not to use gas and other electrical equipment.

When using floor wax, the humidity of the working environment needs to be maintained at 40% to 65%, the temperature is maintained above 15 degrees Celsius, and applied to dry and clean floors. If the air does not fully circulate or high humidity may affect product performance. Follow the instructions for use, remove the old residual floor wax with dewaxed water or wax remover, and thoroughly rinse the floor to ensure it is clean and dry.

Precautions

1. Should not be used under strong light or high temperature.

2. Store in a cool dry place, avoid heating or freezing.

3. Do not allow children to come in contact with it.

Product Specifications: 350 g / box

Shelf life: 2 years floor

Flooring floor waxing floor maintenance paint marble window floor tile marble tile high-grade tile ceramic tile floor tile ld tile

Super-low Ash Coal Activated Carbon

coal-based activated carbon for water purification is widely used in the deep purification of drinking water, industrial water and wastewater. Industrial water purification and gas phase adsorption, such as power plant, petrochemical, oil refinery, food and beverage, sugar wine, medicine, electronics, fish, marine and other industries water purification treatment, can effectively absorb the water in the free, sulfur and other organic pollution special The price of the coal-activated carbon filter material, especially the precursor of the Mutant (THM), is to purify the impurity and remove the odor. can also be used for industrial exhaust purification, gas desulfurization, petroleum catalytic reforming, gas separation, pressure swing adsorption, air drying, food preservation, gas masks, media carrier recovery solvent Coal activated carbon, industrial solvent filtration, decolorization, purification and so on.

Use: Used in the purification of drinking water, deodorizing, brewing industry, decoloring of pharmaceutical and chemical products.

Spec.:

Model NO.
Moisture(%)
Strength(%)
Ash(%)
Idine value(mg/g)
Carbon tetrachloride(%)
Packing density(g/L)
pH-value
Grain diameter(mm)
DX-3060
≤3
≥95
≤5
≥1010
≥60
520±20
8-10
Φ3.0
DX-3070
≤3
≥95
≤6
≥1030
≥70
500±20
8-10
Φ3.0
DX-3080
≤3
≥93
≤8
≥1050
≥80
450±20
8-10
Φ3.0
DX-4060
≤3
≥95
≤5
≥1010
≥60
530±20
8-10
Φ4.0
DX-4070
≤3
≥95
≤6
≥1030
≥70
520±20
8-10
Φ4.0
DX-4080
≤3
≥95
≤8
≥1050
≥80
460±20
8-10
Φ4.0
DX-4090
≤3
≥93
≤9
≥1080
≥90
430±20
8-10
Φ4.0
DX-40100
≤3
≥90
≤10
≥1100
≥100
370±20
8-10
Φ4.0
8×30
≤5
≥93
≤5
≥1000
≥60
460±20
8-10
-
12×40
≤5
≥93
≤5
≥1000
≥60
450±20
8-10
-

Super-Low Ash Coal Activated Carbon

Super-Low Ash Coal Activated Carbon,Coal Agglomerated Activated Carbon,Coal-Based Granular Activated Carbon,Granular Activated Carbon

SHIZUISHAN ZhongShi activated carbon co,.ltd , https://www.zscarbonchina.com