At present, we have introduced advanced technology and equipment in the domestic stone industry. All kinds of stone machinery are constantly being used and developed. We use diamond tools to mine stone and process various shapes of plates (mainly shaped plates) to produce high efficiency. The advantages of good quality and low cost are widely used, reflecting the new development of modern industrial production technology. Diamond beaded rope has been widely used in China's stone industry to obtain high-quality blocks and various shapes of plates, which has improved the processing quality, production efficiency and economic benefits of stone. The use of diamond beaded ropes requires certain conditions. Generally, in open pit mining, there must be power, water and highways. At the same time, there are lifting equipment, transportation tools, large sites, and the thickness of the ore layer is at least 500mm and a relatively complete shape. . Diamond beaded ropes can't be used directly. After a series of work, they can be used directly. The details are as follows:
1 Punch: Punch is a key preparation. If the hole is not well, it directly affects the piercing of the beaded rope, affecting the service life of the rope and the cutting efficiency. Therefore, the process of punching is particularly important. To cut a large piece of material, you must make three holes, one vertical hole and two horizontal holes.
2 stringing through the hole: At present, when the domestic stone industry uses the beaded rope, most of them use the artificial stringing method, that is, the one end of the rope is fixed with a plurality of loops of the circuit, which is inserted from one hole and is taken out from the other hole by the wire. Just wear the beaded rope.
3Installation equipment: After the beaded rope is punched through, the equipment is installed. Due to the heavy equipment, and after cutting a plane, the equipment needs to be re-adjusted. Therefore, a lifting equipment must be equipped at the side, and it can be installed at any time. .
4 Water supply: When cutting stone, because the wire speed of the rope is large, the friction between the stone and the stone is large. If there is not enough water or water, there is a lot of heat between the rope and the stone, which will not only deform the spring and the wire rope, but may even make the spring Melt and bond together, losing elasticity, which will reduce the life of the bead rope. In order to ensure the quality and longevity of the rope, water must be supplied and the water supply must be added along the direction of the rope.
Portable Plasma Cutting Machine
1. Portable type Mainly for the small space, outside work space or low budget to set up work. easy to install and move
2. Plasma Cutting is more better than flame cutting for thin sheet less than 25mm 3. Hot sales model: 4'x8', 5'x10'
4. Metal sheet cutting and pipe cutting can be choose
5. Accept any materials cutting: Iron plate, Stainless steel plate, Titanium plate,Galvanized sheet, Aluminum plate High speed steel, etc we are specialized
Portable Plasma Cutting Machine
Steel Cutting Machine,Cnc Portable Plasma Cutter,Cnc Plasma Cutting Service,Cnc Plasma Designs
Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnmetalcutting.com